U1313 – Lost Communication with the Steering Angle Sensor.

The ODBII code U1313 indicates a loss of communication with the steering angle sensor, which may affect the vehicle’s stability control and steering systems.

The severity of ODBII code U1313 is moderate.

Common Causes For: U1312 Invalid or Missing Data for Vehicle Speed.

• Faulty steering angle sensor
• Damaged wiring or connectors
• Poor electrical connections
• Malfunctioning power steering control module
• Software issues or calibration errors
• Low battery voltage or electrical system issues
• Interference from aftermarket devices or modifications

Common misdiagnosis for U1313 Lost Communication with the Steering Angle Sensor.

• Faulty steering angle sensor
• Wiring issues or damaged connectors
• Faulty steering column module
• ABS module failure
• Power steering system issues
• Incorrectly calibrated steering angle sensor
• Faulty body control module (BCM)
• Software or firmware issues in the vehicle’s control modules

Common Troubleshooting Steps

When dealing with the OBD-II code U1313, which indicates “Lost Communication with the Steering Angle Sensor,” there are several common troubleshooting steps you can follow to diagnose and potentially resolve the issue. Here’s a structured approach:

• Check for Other Codes: Use an OBD-II scanner to check for any additional trouble codes. Sometimes, related codes can provide more context for the issue.
• Inspect Wiring and Connectors: **Visual Inspection: Check the wiring harness and connectors associated with the steering angle sensor for any signs of damage, corrosion, or loose connections.
• **Connector Pins: Ensure that the pins in the connectors are not bent, corroded, or pushed back.
• Test the Steering Angle Sensor: **Sensor Functionality: If possible, test the steering angle sensor using a multimeter or scan tool to ensure it is functioning correctly. Check the output voltage or resistance as specified in the vehicle’s service manual.
• **Calibration: Some vehicles require the steering angle sensor to be calibrated after installation or repair. Check if calibration is necessary.
• Check Power and Ground: **Power Supply: Verify that the steering angle sensor is receiving the correct voltage. Use a multimeter to check the power supply at the sensor connector.
• **Ground Connection: Ensure that the ground connection for the sensor is intact and has a good connection.
• Inspect the CAN Bus: **Communication Lines: Since the steering angle sensor communicates over the CAN bus, check for any issues with the CAN wiring. Look for shorts, opens, or interference in the communication lines.
• **CAN Bus Termination: Ensure that the CAN bus is properly terminated at both ends.
• Check for Software Issues: **ECU Updates: Sometimes, the issue can be resolved by updating the vehicle’s ECU software. Check with the manufacturer for any available updates.
• **Resetting the System: Clear the trouble codes and see if the U1313 code returns. This can sometimes reset communication issues.
• Inspect Related Components: **Steering Column Components: Check for any issues with the steering column, such as the clock spring, which can affect sensor communication.
• **Other Sensors: Inspect other related sensors and modules that may affect the steering angle sensor’s operation.
• Consult Technical Service Bulletins (TSBs): Look for any TSBs related to the steering angle sensor or communication issues for your specific vehicle make and model. Manufacturers may have specific fixes or recommendations.
• Professional Diagnosis: If the issue persists after performing the above steps, consider seeking help from a professional mechanic or dealership. They may have specialized tools and knowledge to diagnose the problem more effectively.Conclusion By following these troubleshooting steps, you can systematically identify and resolve the issue related to the U1313 code. Always refer to the vehicle’s service manual for specific procedures and specifications related to your vehicle.