U1359 – Invalid Data Received from Vehicle Control Module.

The ODBII code U1359 indicates that the vehicle’s control module has received invalid or corrupted data from another control module, which may affect vehicle performance or functionality.

The severity of ODBII code U1359 is generally considered moderate.

Common Causes For: U1358 U1358: “Control Module Communication Failure”

• Faulty Vehicle Control Module (VCM)
• Poor or damaged wiring/connectors
• Corrupted software or firmware in the VCM
• Communication issues between modules
• Faulty sensors sending incorrect data
• Low battery voltage or electrical issues
• Grounding problems in the vehicle’s electrical system

Common misdiagnosis for U1359 Invalid Data Received from Vehicle Control Module.

• Faulty Vehicle Control Module (VCM)
• Wiring issues or shorts in the communication lines
• Faulty sensors or actuators
• Corrupted software or firmware in the VCM
• Issues with the power supply to the VCM
• Problems with other control modules affecting communication
• Incorrectly installed aftermarket accessories or modifications

Common Troubleshooting Steps

The OBD-II code U1359 indicates that the vehicle’s control module has received invalid data from another control module. This can be caused by various issues, including communication problems, wiring issues, or faults in the control modules themselves. Here are some common troubleshooting steps to diagnose and resolve the U1359 code:

• Check for Additional Codes: Use an OBD-II scanner to check for any other trouble codes that may be present. Addressing related codes can help pinpoint the issue.
• Inspect Wiring and Connectors:
• Examine the wiring and connectors associated with the control modules involved. Look for signs of damage, corrosion, or loose connections.
• Pay special attention to the wiring harnesses that connect the modules, as these can be prone to wear and tear.
• Check for Software Updates:
• Verify if there are any software updates available for the vehicle’s control modules. Manufacturers sometimes release updates to fix bugs or improve communication between modules.
• Inspect Control Modules:
• If the issue persists, consider inspecting the control modules themselves for signs of damage or failure. This may involve checking for burnt components or other physical damage.
• Test the Control Modules:
• If you have access to diagnostic tools, perform tests on the control modules to ensure they are functioning correctly. This may include checking for proper voltage and ground.
• Clear Codes and Test Drive:
• After performing inspections and repairs, clear the trouble codes using the OBD-II scanner and take the vehicle for a test drive to see if the code returns.
• Check for Ground Issues:
• Ensure that all ground connections for the control modules are secure and free of corrosion. Poor grounding can lead to communication issues.
• Look for Intermittent Issues:
• If the code is intermittent, monitor the vehicle’s performance and check for specific conditions that may trigger the code, such as temperature changes or specific driving conditions.
• Consult Technical Service Bulletins (TSBs):
• Check for any TSBs related to the U1359 code for your specific vehicle make and model. Manufacturers may have documented common issues and solutions.
• Seek Professional Help:
• If you are unable to resolve the issue after following these steps, consider seeking assistance from a qualified mechanic or dealership. They may have access to specialized diagnostic equipment and expertise. By following these troubleshooting steps, you can systematically identify and address the underlying cause of the U1359 code.