U1363 – Control Module Communication Fault

The ODBII code U1363 indicates a communication fault between control modules in a vehicle, suggesting that one or more modules are not properly communicating with each other.

The severity of ODBII code U1363: Control Module Communication Fault is generally considered moderate to severe.

Common Causes For: 1. U1350: Module Communication Failure

• Faulty control module
• Damaged wiring or connectors
• Poor ground connections
• Corroded terminals
• Intermittent electrical connections
• Software issues or bugs
• Faulty communication bus (CAN, LIN, etc.)
• Low battery voltage or power supply issues

Common misdiagnosis for 1. U1363: Control Module Communication Fault

• Faulty control module
• Wiring issues or shorts
• Poor ground connections
• Corrupted software or firmware
• Faulty sensors
• Battery or power supply issues
• Intermittent connection problems
• Incorrectly installed aftermarket components

Common Troubleshooting Steps

When dealing with OBD-II code U1363, which indicates a “Control Module Communication Fault,” there are several common troubleshooting steps you can follow to diagnose and potentially resolve the issue. Here’s a structured approach:

• Check for Additional Codes: Use an OBD-II scanner to check for any other trouble codes that may be present. Sometimes, multiple codes can provide more context for the issue.
• Inspect Wiring and Connectors: **Visual Inspection: Check the wiring and connectors related to the control modules for any signs of damage, corrosion, or loose connections.
• **Connector Pins: Ensure that the pins in the connectors are not bent, corroded, or damaged.
• Check Power and Ground: Verify that the control modules have the proper power supply and ground connections. Use a multimeter to check voltage and ground continuity.
• Inspect the CAN Bus: If the vehicle uses a Controller Area Network (CAN) bus, check for issues in the bus wiring. Look for shorts, opens, or any other damage.
• Use a CAN bus scanner to monitor the communication between modules.
• Test Control Modules: If possible, test the affected control module(s) for functionality. This may involve using specialized diagnostic tools or swapping with a known good module.
• Check for Software Updates: Sometimes, communication issues can be resolved with a software update. Check with the manufacturer for any available updates for the control modules.
• Clear Codes and Test Drive: After performing any repairs or checks, clear the trouble codes and take the vehicle for a test drive to see if the code returns.
• Consult Technical Service Bulletins (TSBs): Look for any TSBs related to the specific make and model of the vehicle. Manufacturers may have issued guidance on common issues related to communication faults.
• Professional Diagnosis: If the issue persists after performing the above steps, consider seeking help from a professional mechanic or dealership. They may have access to advanced diagnostic tools and resources.
• Document Findings: Keep a record of all findings, repairs, and tests performed. This documentation can be helpful for future reference or if further diagnosis is needed. By following these steps, you can systematically approach the troubleshooting of the U1363 code and identify the underlying issue.