U1378 – Invalid Data Received from Vehicle Control Module.
The ODBII code U1378 indicates that the vehicle’s control module has received invalid or corrupted data from another control module, suggesting a communication issue within the vehicle’s network.
The severity of ODBII code U1378 is generally considered moderate.
Common Causes For: U1377 Invalid Data Received from Vehicle Control Module.
- Faulty Vehicle Control Module (VCM)
- Poor or damaged wiring/connectors
- Corrupted software or firmware in the VCM
- Communication issues between modules
- Low battery voltage or electrical issues
- Faulty sensors sending incorrect data
- Grounding issues in the electrical system
Common misdiagnosis for U1378 Invalid Data Received from Vehicle Control Module.
- Faulty Vehicle Control Module (VCM)
- Wiring issues or short circuits
- Corrupted software or firmware in the VCM
- Faulty sensors or actuators
- Issues with the communication network (CAN bus)
- Battery or power supply problems
- Incorrectly installed aftermarket components
Common Troubleshooting Steps
The OBD-II code U1378 indicates that there is an issue with the communication between the vehicle’s control modules, specifically that invalid data has been received from the vehicle control module. Here are some common troubleshooting steps to diagnose and resolve this issue:
- Check for Other Codes: Use an OBD-II scanner to check for any other trouble codes that may be present. Sometimes, multiple codes can provide more context for the issue.
- Inspect Wiring and Connectors: Examine the wiring and connectors associated with the vehicle control module and any related modules. Look for signs of damage, corrosion, loose connections, or frayed wires.
- Check for Software Updates: Verify if there are any software updates available for the vehicle’s control modules. Sometimes, manufacturers release updates to fix communication issues.
- Inspect the Control Module: If the wiring and connectors are in good condition, the control module itself may be faulty. Check for any signs of physical damage or water intrusion.
- Perform a Hard Reset: Disconnect the vehicle’s battery for a few minutes to reset the control modules. Reconnect the battery and see if the code reappears.
- Check for Ground Issues: Ensure that all ground connections related to the control modules are secure and free of corrosion. Poor grounding can lead to communication issues.
- Test the Control Module: If possible, test the control module using a scan tool that can communicate with it. This can help determine if the module is functioning correctly.
- Look for Interference: Sometimes, aftermarket accessories or modifications can interfere with the communication between modules. Check for any recent changes to the vehicle that could be causing the issue.
- Consult Technical Service Bulletins (TSBs): Check for any TSBs related to the U1378 code for your specific vehicle make and model. Manufacturers may have documented solutions for known issues.
- Seek Professional Help: If the issue persists after performing the above steps, it may be necessary to consult a professional mechanic or dealership for further diagnosis and repair. By following these steps, you can systematically identify and address the root cause of the U1378 code.