U1396 – Control Module Communication Failure

The ODBII code U1396 indicates a “Control Module Communication Failure,” meaning there is a problem with communication between the vehicle’s control modules, which can affect various systems and functions.

The severity of ODBII code U1396 is moderate.

Common Causes For: U1395 U1395: “Control Module Communication Failure”

• Faulty control module
• Poor electrical connections
• Damaged wiring harness
• Corroded connectors
• Software issues or bugs
• Low battery voltage
• Intermittent communication issues
• Faulty CAN bus system
• Grounding issues
• Incompatible or malfunctioning aftermarket parts

Common misdiagnosis for U1396 U1396: “Control Module Communication Failure”

• Faulty control module
• Wiring issues
• Poor ground connections
• Corrupted software/firmware
• Faulty sensors
• Battery or power supply problems
• Intermittent connection issues
• Communication network faults (e.g., CAN bus issues)

Common Troubleshooting Steps

The OBD-II code U1396 indicates a “Control Module Communication Failure.” This code typically suggests that there is a problem with communication between the vehicle’s control modules. Here are some common troubleshooting steps to diagnose and resolve this issue:

• Check for Other Codes: Use an OBD-II scanner to check for any additional trouble codes. Sometimes, other codes can provide context or lead to the root cause of the communication failure.
• Inspect Wiring and Connectors:
• Visually inspect the wiring and connectors associated with the control modules. Look for signs of damage, corrosion, or loose connections.
• Pay special attention to the wiring harnesses that connect the affected modules.
• Check Power and Ground:
• Ensure that the control modules have proper power and ground connections. Use a multimeter to check voltage and ground continuity.
• If there is a power or ground issue, repair the wiring or connections as needed.
• Test Control Modules:
• If possible, test the affected control modules individually. This may involve using a scan tool to communicate with each module and check for proper operation.
• If a specific module is unresponsive, it may need to be replaced.
• Inspect the CAN Bus:
• The Controller Area Network (CAN) bus is responsible for communication between modules. Check for any faults in the CAN bus wiring.
• Use an oscilloscope or a CAN bus tester to monitor the communication signals on the bus.
• Check for Software Updates:
• Sometimes, communication issues can be resolved with a software update. Check with the vehicle manufacturer for any available updates for the control modules.
• Clear Codes and Test Drive:
• After performing any repairs or inspections, clear the trouble codes using the OBD-II scanner and take the vehicle for a test drive to see if the code returns.
• Consult Technical Service Bulletins (TSBs):
• Look for any TSBs related to the specific make and model of the vehicle. Manufacturers may have issued guidance on common issues related to control module communication.
• Seek Professional Help:
• If the issue persists after performing the above steps, it may be necessary to consult a professional mechanic or technician who has experience with the specific vehicle and its control systems. By following these troubleshooting steps, you can systematically identify and resolve the underlying cause of the U1396 code.