U1404 – Invalid Data Received from Transmission Control Module (TCM).

By Fixitfor.us |
Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

The ODBII code U1404 indicates that the Engine Control Module (ECM) has received invalid or corrupted data from the Transmission Control Module (TCM).

The severity of ODBII code U1404 is generally considered moderate to severe.

Common Causes For: U1403 Invalid Data Received from Transmission Control Module (TCM)”.

  • Faulty Transmission Control Module (TCM)
  • Poor electrical connections or wiring issues
  • Corrupted data communication between TCM and other modules
  • Faulty Engine Control Module (ECM)
  • Software or firmware issues
  • Low battery voltage or electrical system problems
  • Faulty sensors related to transmission operation
  • Transmission fluid issues (e.g., low fluid level, contamination)

Common misdiagnosis for U1404 Invalid Data Received from Transmission Control Module (TCM).

  • Faulty Transmission Control Module (TCM)
  • Wiring issues or short circuits in the transmission harness
  • Faulty Engine Control Module (ECM)
  • Incorrectly calibrated or malfunctioning sensors (e.g., speed sensors)
  • Transmission fluid issues (low fluid, contamination)
  • Faulty or damaged connectors
  • Software or firmware issues in the TCM or ECM
  • Mechanical transmission problems (e.g., slipping, internal damage)

Common Troubleshooting Steps

The OBD-II code U1404 indicates that the Engine Control Module (ECM) has received invalid data from the Transmission Control Module (TCM). This can be caused by various issues, including communication problems, sensor malfunctions, or wiring issues. Here are some common troubleshooting steps to diagnose and resolve the U1404 code:

  • Check for Additional Codes: Use an OBD-II scanner to check for any other trouble codes that may be present. This can provide more context and help identify related issues.
  • Inspect Wiring and Connectors: Examine the wiring and connectors between the ECM and TCM for any signs of damage, corrosion, or loose connections. Pay special attention to the pins and connectors for any bent or broken pins.
  • Check for Software Updates: Verify if there are any available software updates for the ECM or TCM. Sometimes, manufacturers release updates to fix known issues.
  • Inspect the TCM: Check the TCM for any signs of damage or malfunction. If possible, test the TCM to ensure it is functioning correctly.
  • Check Power and Ground: Ensure that the TCM is receiving proper power and ground. Use a multimeter to check voltage and ground connections.
  • Test Communication Lines: Use a scan tool to monitor the communication between the ECM and TCM. Check for any communication errors or interruptions.
  • Inspect Related Sensors: Check the operation of related sensors, such as the vehicle speed sensor (VSS) and transmission fluid temperature sensor. Malfunctioning sensors can lead to invalid data being sent to the ECM.
  • Clear Codes and Test Drive: After performing any repairs or inspections, clear the trouble codes and take the vehicle for a test drive to see if the code returns.
  • Consult Technical Service Bulletins (TSBs): Look for any TSBs related to the U1404 code for your specific vehicle make and model. Manufacturers may have specific recommendations for addressing this issue.
  • Professional Diagnosis: If the issue persists after performing the above steps, consider seeking help from a professional mechanic or dealership. They may have access to specialized diagnostic tools and knowledge of specific vehicle issues.Conclusion Troubleshooting the U1404 code involves a systematic approach to identify the root cause of the invalid data received from the TCM. By following these steps, you can narrow down the potential issues and work towards a resolution.

Leave a Comment

You must be logged in to post a comment.