U1410 – Invalid Data Received from Anti-lock Brake System (ABS) Control Module.

The ODBII code U1410 indicates that the vehicle’s control module has received invalid or erroneous data from the Anti-lock Brake System (ABS) control module, which may affect the vehicle’s performance or safety systems.

The severity of ODBII code U1410 is generally considered moderate.

Common Causes For: U1409 Invalid Data Received from Vehicle Control Module A.

• Faulty ABS control module
• Corrupted data communication
• Damaged wiring or connectors
• Faulty wheel speed sensors
• Low battery voltage
• Software issues or updates needed
• Grounding issues in the ABS system
• Intermittent electrical connections

Common misdiagnosis for U1410 Invalid Data Received from Anti-lock Brake System (ABS) Control Module.

• Faulty ABS control module
• Wiring issues or shorts in the ABS system
• Faulty wheel speed sensors
• Incorrectly calibrated or malfunctioning speedometer
• Issues with the engine control module (ECM)
• Problems with the vehicle’s communication network (CAN bus)
• Faulty brake pedal position sensor
• Malfunctioning traction control system
• Incorrectly diagnosed brake system issues
• Battery or charging system problems

Common Troubleshooting Steps

When dealing with the OBD-II code U1410, which indicates “Invalid Data Received from Anti-lock Brake System (ABS) Control Module,” there are several common troubleshooting steps you can follow to diagnose and potentially resolve the issue. Here’s a structured approach:

• Check for Additional Codes: Use an OBD-II scanner to check for any other trouble codes that may be present. Codes related to the ABS or other systems can provide additional context.
• Inspect Wiring and Connectors: **Visual Inspection: Check the wiring and connectors between the ABS module and the vehicle’s computer (ECM). Look for signs of damage, corrosion, or loose connections.
• **Connector Pins: Ensure that the pins in the connectors are not bent or corroded.
• Check the ABS Module: **Functionality: Verify that the ABS module is functioning correctly. This may involve checking for proper operation of the ABS system during a test drive.
• **Power and Ground: Ensure that the ABS module is receiving the correct power and ground signals. Use a multimeter to check voltage and ground continuity.
• Inspect the CAN Bus: **Communication Issues: Since U1410 is a communication-related code, check the Controller Area Network (CAN) bus for issues. Look for shorts, opens, or other faults in the wiring.
• **Termination Resistors: Ensure that the CAN bus has the proper termination resistors in place.
• Scan Tool Data: Use a scan tool to monitor live data from the ABS module. Look for any unusual readings or data that doesn’t make sense.
• Compare the data from the ABS module with other modules to see if there are discrepancies.
• Reset the Codes: Clear the trouble codes using the scan tool and take the vehicle for a test drive to see if the code returns. Sometimes, a temporary glitch can cause a code to set.
• Check for Software Updates: Verify if there are any software updates available for the ABS module or the vehicle’s ECM. Sometimes, manufacturers release updates to fix known issues.
• Inspect Related Components: Check other components that may affect the ABS system, such as wheel speed sensors, brake pedal position sensors, and other related systems.
• Consult Technical Service Bulletins (TSBs): Look for any TSBs related to the ABS system or the specific vehicle make and model. Manufacturers may have issued guidance on common issues.
• Professional Diagnosis: If the issue persists after performing the above steps, consider seeking help from a professional mechanic or a dealership. They may have specialized tools and knowledge to diagnose complex issues.Conclusion By following these troubleshooting steps, you can systematically identify and resolve the cause of the U1410 code. Always ensure safety when working on vehicle systems, and consult a professional if you are unsure about any steps.