U1412 – Invalid Data Received from Anti-lock Brake System (ABS) Control Module.

The ODBII code U1412 indicates that the vehicle’s control module has received invalid or corrupted data from the Anti-lock Brake System (ABS) control module, which may affect the vehicle’s braking performance and stability control systems.

The severity of ODBII code U1412 is generally considered moderate.

Common Causes For: U1411 Invalid Data Received from Anti-lock Brake System (ABS) Control Module.

• Faulty ABS control module
• Corrupted or damaged wiring/connectors
• Poor ground connections
• Faulty wheel speed sensors
• Communication issues between modules
• Software glitches or outdated firmware
• Low battery voltage or electrical issues
• Faulty or damaged CAN bus system

Common misdiagnosis for U1412 Invalid Data Received from Anti-lock Brake System (ABS) Control Module.

• Faulty ABS Control Module
• Wiring issues or damaged connectors
• Faulty wheel speed sensors
• Incorrectly calibrated or malfunctioning speedometer
• Issues with the Engine Control Module (ECM)
• Problems with the traction control system
• Faulty brake pedal position sensor
• Incorrectly diagnosed brake system issues
• Battery or charging system problems
• Software or firmware issues in the ABS module

Common Troubleshooting Steps

When dealing with the OBD-II code U1412, which indicates “Invalid Data Received from Anti-lock Brake System (ABS) Control Module,” there are several common troubleshooting steps you can follow to diagnose and potentially resolve the issue. Here’s a structured approach:

• Check for Additional Codes: Use an OBD-II scanner to check for any other trouble codes that may be present. Codes related to the ABS or other systems can provide additional context.
• Inspect Wiring and Connectors: **Visual Inspection: Check the wiring and connectors between the ABS control module and the vehicle’s main computer (ECM). Look for signs of damage, corrosion, or loose connections.
• **Connector Pins: Ensure that the pins in the connectors are not bent or corroded.
• Check the ABS Control Module: **Functionality: Verify that the ABS control module is functioning correctly. This may involve checking for proper power and ground at the module.
• **Reprogramming: In some cases, the ABS module may need to be reprogrammed or updated with the latest software.
• Inspect the ABS Sensors: **Wheel Speed Sensors: Check the wheel speed sensors for proper operation. Ensure they are clean and free from debris.
• **Signal Testing: Use a multimeter or oscilloscope to test the output signals from the wheel speed sensors to ensure they are within specifications.
• Check for Ground Issues: Ensure that the ABS control module has a good ground connection. Poor grounding can lead to communication issues.
• Scan for Communication Issues: Use a scan tool to check for communication between the ABS module and the ECM. If there are communication errors, it may indicate a problem with the CAN bus or wiring.
• Inspect the CAN Bus: If your vehicle uses a Controller Area Network (CAN) bus, check for any faults in the network. Look for short circuits, open circuits, or other issues that could affect communication.
• Clear Codes and Test Drive: After performing the above checks and repairs, clear the trouble codes using the OBD-II scanner. Take the vehicle for a test drive to see if the code returns.
• Consult Technical Service Bulletins (TSBs): Check for any TSBs related to the U1412 code or ABS system for your specific vehicle make and model. Manufacturers may have specific fixes or updates.
• Professional Diagnosis: If the issue persists after performing the above steps, consider seeking help from a professional mechanic or dealership. They may have specialized tools and knowledge to diagnose complex issues.Conclusion Troubleshooting the U1412 code involves a systematic approach to check for wiring issues, sensor functionality, and communication problems. By following these steps, you can often identify the root cause of the problem and take appropriate action to resolve it.