U1435 – Invalid Data Received from Vehicle Dynamics Control Module.

The ODBII code U1435 indicates that the vehicle’s control module has received invalid or erroneous data from the Vehicle Dynamics Control Module, which may affect the vehicle’s stability and handling systems.

The severity of ODBII code U1435 is generally considered moderate.

Common Causes For: U1434 Invalid Data Received from Vehicle Dynamics Control Module.

• Faulty Vehicle Dynamics Control Module (VDCM)
• Poor or damaged wiring/connectors between the VDCM and the ECU
• Corrupted or incompatible software in the VDCM
• Faulty sensors related to vehicle dynamics (e.g., wheel speed sensors)
• Communication issues within the CAN bus network
• Low battery voltage or electrical system issues
• Grounding issues affecting the VDCM or related components

Common misdiagnosis for U1435 Invalid Data Received from Vehicle Dynamics Control Module.

• ABS module failure
• Wheel speed sensor issues
• Faulty wiring or connectors
• Powertrain control module (PCM) issues
• Incorrect tire size or pressure
• Steering angle sensor malfunction
• Traction control system faults
• Electronic stability control (ESC) problems

Common Troubleshooting Steps

The OBD-II code U1435 indicates that the Engine Control Module (ECM) has received invalid data from the Vehicle Dynamics Control Module (VDCM). This can be related to issues with communication between modules or problems within the VDCM itself. Here are some common troubleshooting steps to diagnose and resolve this issue:

• Check for Additional Codes: Use an OBD-II scanner to check for any other trouble codes that may be present. This can provide more context and help identify related issues.
• Inspect Wiring and Connectors:
• Visually inspect the wiring and connectors between the ECM and the VDCM. Look for signs of damage, corrosion, or loose connections.
• Ensure that all connectors are securely plugged in and that there are no bent pins.
• Check for Ground Issues:
• Ensure that the ground connections for both the ECM and VDCM are secure and free of corrosion. Poor grounding can lead to communication issues.
• Test the VDCM:
• If possible, test the Vehicle Dynamics Control Module to ensure it is functioning correctly. This may involve using a specialized scan tool or diagnostic equipment.
• Inspect for Short Circuits:
• Check for any short circuits in the wiring harness that could be causing incorrect signals to be sent to the ECM.
• Update or Reprogram Modules:
• In some cases, a software update or reprogramming of the ECM or VDCM may be necessary. Check with the manufacturer for any available updates.
• Clear Codes and Test Drive:
• After performing any repairs or inspections, clear the trouble codes and take the vehicle for a test drive to see if the code returns.
• Check for Environmental Factors:
• Sometimes, environmental factors such as moisture or extreme temperatures can affect module performance. Ensure that the modules are not exposed to conditions that could cause failure.
• Consult Technical Service Bulletins (TSBs):
• Check for any TSBs related to the specific make and model of the vehicle. Manufacturers may have issued guidance on common issues related to the U1435 code.
• Seek Professional Help:
• If the issue persists after performing the above steps, it may be necessary to consult a professional mechanic or dealership for further diagnosis and repair. By following these steps, you can systematically identify and address the underlying cause of the U1435 code.