U1497 – Control Module Communication Error

The ODBII code U1497 indicates a “Control Module Communication Error,” meaning there is a problem with communication between the vehicle’s control modules, which may affect their ability to share data or function properly.

The severity of ODBII code U1497 is moderate.

Common Causes For: U1496 Invalid Data Received from Vehicle Control Module.

• Faulty control module
• Poor electrical connections
• Damaged wiring harness
• Corroded connectors
• Software issues or bugs
• Low battery voltage
• Interference from aftermarket devices
• Faulty CAN bus communication
• Grounding issues
• Malfunctioning sensors or actuators

Common misdiagnosis for U1497 U1497: “Control Module Communication Error”

• Faulty control module
• Wiring issues
• Poor ground connections
• Corrupted software/firmware
• Faulty sensors
• Battery or power supply issues
• Intermittent connection problems
• Communication network faults (CAN bus issues)

Common Troubleshooting Steps

The OBD-II code U1497 indicates a “Control Module Communication Error.” This code typically suggests that there is a problem with communication between the vehicle’s control modules. Here are some common troubleshooting steps to diagnose and resolve this issue:

• Check for Additional Codes: Use an OBD-II scanner to check for any other trouble codes that may be present. Sometimes, multiple codes can provide more context for the issue.
• Inspect Wiring and Connectors: Examine the wiring and connectors associated with the control modules. Look for signs of damage, corrosion, or loose connections. Pay special attention to the wiring harnesses that connect the affected modules.
• Verify Power and Ground: Ensure that the control module in question is receiving the proper power and ground. Use a multimeter to check voltage and ground continuity at the module’s connector.
• Check for Short Circuits: Inspect the wiring for any short circuits that may be causing communication issues. This can include checking for pinched wires or damaged insulation.
• Test the Control Module: If the wiring and connections appear to be in good condition, the control module itself may be faulty. If possible, test the module in another vehicle or replace it with a known good unit to see if the problem persists.
• Inspect the CAN Bus: If the vehicle uses a Controller Area Network (CAN) bus for communication, check the integrity of the CAN bus wiring. Look for any breaks or shorts in the bus lines.
• Check for Software Updates: Sometimes, communication issues can be resolved with a software update. Check with the manufacturer or a dealership to see if there are any available updates for the control modules.
• Clear Codes and Test Drive: After performing any repairs or checks, clear the trouble codes using the OBD-II scanner and take the vehicle for a test drive to see if the code returns.
• Consult Technical Service Bulletins (TSBs): Check for any TSBs related to the specific make and model of the vehicle. Manufacturers may have issued guidance on common issues related to control module communication.
• Seek Professional Help: If the issue persists after performing these steps, it may be necessary to consult a professional mechanic or technician who has experience with the specific vehicle and its control systems. By following these troubleshooting steps, you can systematically identify and resolve the underlying cause of the U1497 code.