U1499 – Manufacturer Specific communication issue, typically related to the vehicle’s network or module communication.
The ODBII code U1499 indicates a manufacturer-specific communication issue, typically related to a problem in the vehicle’s network or communication between modules.
The severity of ODBII code U1499 is typically moderate to high.
Common Causes For: U1498 Invalid Data Received from Vehicle Dynamics Control Module.
- Faulty wiring or connectors in the communication network.
- Malfunctioning control modules.
- Corrupted software or firmware in a module.
- Poor ground connections.
- Interference from aftermarket devices.
- Damaged or shorted communication lines.
- Incompatible or missing modules in the network.
- Low battery voltage or power supply issues.
Common misdiagnosis for U1499 Manufacturer Specific” communication issue, typically related to the vehicle’s network or module communication.
- Faulty wiring or connectors
- Defective control modules
- Incorrectly programmed modules
- Battery or power supply issues
- Grounding problems
- Software glitches or updates needed
- Intermittent communication faults
- Faulty sensors or actuators
- Corrupted data or configuration settings
- Issues with aftermarket accessories or modifications
Common Troubleshooting Steps
When dealing with an OBD-II code U1499, which is a manufacturer-specific communication issue typically related to the vehicle’s network or module communication, you can follow these common troubleshooting steps:
- Check for Additional Codes: Start by scanning the vehicle for any other trouble codes. U1499 may be accompanied by other codes that can provide more context about the issue.
- Inspect Wiring and Connectors: Examine the wiring and connectors related to the affected modules. Look for signs of damage, corrosion, loose connections, or frayed wires. Pay special attention to the CAN (Controller Area Network) bus wiring.
- Verify Module Functionality: Identify the specific module that is generating the U1499 code. Check if the module is functioning correctly. This may involve testing the module’s inputs and outputs or performing a functional test.
- Check Power and Ground: Ensure that the affected module has proper power and ground connections. Use a multimeter to verify voltage and ground continuity.
- Inspect the CAN Bus: If the vehicle uses a CAN bus system, check for communication issues on the bus. You can use a scan tool to monitor the bus for activity. Look for any interruptions or faults in communication between modules.
- Perform a Network Test: Use a professional scan tool to perform a network test. This can help identify if other modules are not communicating properly or if there are any faults in the network.
- Update Software/Firmware: Check if there are any software or firmware updates available for the vehicle’s modules. Sometimes, communication issues can be resolved with an update.
- Reset the Modules: Clear the trouble codes and reset the modules. After resetting, take the vehicle for a test drive to see if the code returns.
- Check for Interference: Look for any aftermarket devices or modifications that may interfere with the vehicle’s communication network. This includes alarm systems, stereo systems, or other electronic devices.
- Consult Technical Service Bulletins (TSBs): Check for any TSBs related to the specific make and model of the vehicle. Manufacturers may have issued guidance on common issues related to U1499. 1
- Professional Diagnosis: If the issue persists after performing the above steps, consider seeking help from a professional technician or dealership. They may have access to specialized diagnostic tools and resources. By following these steps, you can systematically diagnose and potentially resolve the communication issue associated with the U1499 code.