U1524 – Control Module Communication Error

The ODBII code U1524 indicates a “Control Module Communication Error,” which means there is a problem with communication between the vehicle’s control modules, potentially due to a wiring issue, a faulty module, or a network problem.

Moderate.

Common Causes For: U1523 U1523: “Control Module Communication Failure”

• Faulty control module
• Poor electrical connections
• Damaged wiring harness
• Corroded connectors
• Software issues or bugs
• Low battery voltage
• Interference from aftermarket devices
• Faulty CAN bus communication
• Grounding issues

Common misdiagnosis for U1524 U1524: “Control Module Communication Error”

• Faulty control module
• Wiring issues
• Poor ground connections
• Corroded connectors
• Software glitches
• Battery or charging system problems
• Intermittent communication faults
• Faulty sensors

Common Troubleshooting Steps

The OBD-II code U1524 indicates a “Control Module Communication Error.” This code typically suggests that there is a problem with communication between the vehicle’s control modules. Here are some common troubleshooting steps to diagnose and resolve this issue:

• Check for Additional Codes: Use an OBD-II scanner to check for any other trouble codes that may be present. Sometimes, multiple codes can provide more context for the issue.
• Inspect Wiring and Connectors:
• Visually inspect the wiring and connectors associated with the control modules. Look for signs of damage, corrosion, or loose connections.
• Pay special attention to the wiring harnesses that connect the affected modules.
• Check Power and Ground:
• Ensure that the control modules have proper power and ground connections. Use a multimeter to check voltage and ground continuity.
• If there are issues with power or ground, trace the wiring back to the source to identify the problem.
• Test Control Modules:
• If possible, test the affected control module(s) to ensure they are functioning correctly. This may involve using specialized diagnostic tools or swapping with a known good module.
• Check for any software updates or reprogramming that may be required for the control modules.
• Inspect the CAN Bus:
• The communication between control modules often occurs over a Controller Area Network (CAN) bus. Inspect the CAN bus wiring for damage or shorts.
• Use a scan tool to monitor the CAN bus for any irregularities in communication.
• Check for Interference:
• Look for any aftermarket devices or modifications that may interfere with the vehicle’s communication systems. This includes alarms, stereo systems, or other electronic devices.
• Clear Codes and Test Drive:
• After performing the above checks and repairs, clear the trouble codes using the OBD-II scanner and take the vehicle for a test drive to see if the code returns.
• Consult Service Manual:
• Refer to the vehicle’s service manual for specific diagnostic procedures related to the U1524 code and the control modules involved.
• Professional Diagnosis:
• If the issue persists after performing the above steps, consider seeking help from a professional mechanic or dealership with experience in diagnosing communication issues in your specific vehicle make and model. By following these steps, you should be able to identify and resolve the underlying issue causing the U1524 code.