U1570 – Communication Bus Off.

The ODBII code U1570 indicates a communication issue where the vehicle’s communication bus is offline or not functioning properly, affecting data exchange between modules.

The severity of ODBII code U1570 Communication Bus Off is moderate to severe.

Common Causes For: U1569 Lost Communication with the Body Control Module (BCM).

• Faulty wiring or connectors in the communication bus.
• Malfunctioning control modules.
• Short circuits or open circuits in the bus lines.
• Corrupted software or firmware in control modules.
• Electrical interference or noise in the communication lines.
• Low battery voltage or power supply issues.
• Faulty or damaged sensors connected to the bus.

Common misdiagnosis for U1570 Communication Bus Off.

• Faulty ABS module
• Defective engine control module (ECM)
• Malfunctioning transmission control module (TCM)
• Wiring issues or shorts in the communication lines
• Bad ground connections
• Faulty sensors
• Incorrectly configured or programmed modules
• Battery or charging system problems
• Corroded connectors
• Software glitches or updates needed

Common Troubleshooting Steps

The OBD-II code U1570 indicates a “Communication Bus Off” issue, which typically means that there is a problem with the communication between various modules in the vehicle’s network. Here are some common troubleshooting steps to diagnose and resolve this issue:

• Check for Additional Codes: Use an OBD-II scanner to check for any other trouble codes that may be present. Sometimes, multiple codes can provide more context for the issue.
• Inspect Wiring and Connectors: Visually inspect the wiring and connectors associated with the communication bus. Look for signs of damage, corrosion, or loose connections. Pay special attention to the CAN (Controller Area Network) bus wiring.
• Check for Short Circuits: Use a multimeter to check for short circuits in the communication lines. Ensure that there are no unintended connections between the CAN high and CAN low wires.
• Test Modules: If possible, test the individual modules on the communication bus (e.g., engine control module, transmission control module, body control module) to ensure they are functioning correctly. A faulty module can disrupt communication.
• Check Power and Ground: Ensure that all modules on the communication bus have proper power and ground connections. A lack of power or a poor ground can cause communication issues.
• Inspect for Interference: Look for any aftermarket devices or modifications that may interfere with the vehicle’s communication network. This includes things like alarm systems, stereo systems, or other electronic accessories.
• Scan for Communication Issues: Use a professional-grade scan tool to perform a network scan. This can help identify which module is not communicating properly.
• Check for Software Updates: Sometimes, a software update for one or more modules can resolve communication issues. Check with the manufacturer for any available updates.
• Clear Codes and Test Drive: After performing any repairs or adjustments, clear the trouble codes and take the vehicle for a test drive to see if the code returns.
• Consult Service Manual: If the issue persists, consult the vehicle’s service manual for specific diagnostic procedures related to the U1570 code and the communication bus system. 1
• Seek Professional Help: If you are unable to resolve the issue, it may be necessary to seek assistance from a qualified automotive technician or dealership, as they may have specialized tools and knowledge to diagnose complex communication issues. By following these steps, you should be able to identify and address the underlying cause of the U1570 code.