U1608 – ECM-BCM Communication Failure

The ODBII code U1608 indicates a communication failure between the Engine Control Module (ECM) and the Body Control Module (BCM), suggesting that these two modules are unable to exchange data properly.

The severity of ODBII code U1608: ECM-BCM Communication Failure is generally considered moderate to high.

Common Causes For: 1. U1603: ECM-BCM Communication Failure

• Faulty ECM (Engine Control Module)
• Faulty BCM (Body Control Module)
• Damaged wiring or connectors between ECM and BCM
• Corroded terminals
• Software issues or programming errors
• Low battery voltage or poor power supply
• Grounding issues
• Interference from aftermarket accessories or modifications

Common misdiagnosis for 1. U1608: ECM-BCM Communication Failure

• Faulty Engine Control Module (ECM)
• Faulty Body Control Module (BCM)
• Wiring issues or shorts in communication lines
• Corrupted software or firmware in ECM or BCM
• Power supply issues to ECM or BCM
• Faulty sensors or actuators related to communication
• Grounding issues affecting module communication
• Intermittent connection problems
• Incorrectly installed aftermarket accessories or modifications
• Battery or charging system problems affecting module operation

Common Troubleshooting Steps

When dealing with OBD-II code U1608, which indicates an ECM-BCM (Engine Control Module – Body Control Module) communication failure, there are several common troubleshooting steps you can follow to diagnose and potentially resolve the issue. Here’s a structured approach:

• Check for Additional Codes: Use an OBD-II scanner to check for any other trouble codes that may be present. Sometimes, multiple codes can provide more context for the issue.
• Inspect Wiring and Connectors: **Visual Inspection: Check the wiring harness and connectors between the ECM and BCM for any signs of damage, corrosion, or loose connections.
• **Connector Pins: Ensure that the pins in the connectors are not bent, corroded, or damaged.
• Check Power and Ground: **Power Supply: Verify that the ECM and BCM are receiving the correct voltage. Use a multimeter to check the power supply to both modules.
• **Ground Connections: Ensure that the ground connections for both the ECM and BCM are secure and free of corrosion.
• Inspect for Short Circuits: Look for any short circuits in the wiring that could be causing communication issues. This may involve checking for continuity between wires that should not be connected.
• Test the Modules: **Module Functionality: If possible, test the ECM and BCM individually to ensure they are functioning correctly. This may involve using specialized diagnostic tools or swapping with known good modules.
• **Reprogramming: In some cases, reprogramming or updating the software in the ECM or BCM may resolve communication issues.
• Check for Interference: Look for any aftermarket accessories or modifications that may interfere with the communication between the ECM and BCM. This includes alarm systems, remote starters, or other electronic devices.
• Clear Codes and Test Drive: After performing the above checks and repairs, clear the trouble codes using the OBD-II scanner and take the vehicle for a test drive to see if the code returns.
• Consult Technical Service Bulletins (TSBs): Check for any manufacturer-specific TSBs related to U1608 or communication issues between the ECM and BCM. There may be known fixes or updates available.
• Seek Professional Help: If the issue persists after performing the above steps, it may be necessary to consult a professional mechanic or technician who has experience with your specific vehicle make and model.Conclusion Troubleshooting U1608 requires a systematic approach to identify and resolve communication issues between the ECM and BCM. By following these steps, you can often pinpoint the problem and take appropriate action to fix it.