U1642 – Body Control Module Communication Failure

The ODBII code U1642 indicates a communication failure between the Body Control Module (BCM) and other modules in the vehicle’s network, suggesting a potential issue with wiring, connectors, or the BCM itself.

The severity of ODBII code U1642 is moderate to high.

Common Causes For: U1641 Lost Communication with Body Control Module (BCM).

• Faulty Body Control Module (BCM)
• Damaged wiring or connectors
• Poor ground connections
• Corroded terminals
• Faulty communication network (CAN bus issues)
• Malfunctioning other modules in the network
• Software issues or programming errors
• Battery voltage issues or low power supply

Common misdiagnosis for U1642 U1642: Body Control Module Communication Failure

• Faulty Body Control Module (BCM)
• Wiring issues or shorts in the communication lines
• Faulty or corroded connectors
• Malfunctioning Instrument Cluster
• Issues with the Powertrain Control Module (PCM)
• Battery or charging system problems
• Faulty sensors or actuators related to the BCM
• Software or firmware issues in the BCM
• Grounding issues in the electrical system
• Other communication module failures (e.g., ABS, airbag module)

Common Troubleshooting Steps

When dealing with OBD-II code U1642, which indicates a Body Control Module (BCM) communication failure, there are several common troubleshooting steps you can follow to diagnose and potentially resolve the issue. Here’s a structured approach:

• Check for Additional Codes: Use an OBD-II scanner to check for any other trouble codes that may be present. Sometimes, multiple codes can provide more context for the issue.
• Inspect Wiring and Connectors: **Visual Inspection: Check the wiring and connectors related to the BCM for any signs of damage, corrosion, or loose connections.
• **Connector Pins: Ensure that the pins in the connectors are not bent or corroded.
• Check Power and Ground: **Power Supply: Verify that the BCM is receiving the correct voltage. Use a multimeter to check the power supply to the BCM.
• **Ground Connections: Ensure that the ground connections for the BCM are secure and free of corrosion.
• Test the BCM: If possible, test the BCM to ensure it is functioning correctly. This may involve using a scan tool that can communicate with the BCM or swapping it with a known good unit.
• Inspect Communication Lines: Check the communication lines (CAN bus) for continuity and proper operation. Look for shorts, opens, or high resistance in the wiring.
• Use a scope or a scan tool to monitor the communication signals on the bus.
• Check for Interference: Look for any aftermarket devices or modifications that may interfere with the BCM’s communication. This includes alarms, remote starters, or other electronic devices.
• Reset the System: After performing checks and repairs, clear the codes using the OBD-II scanner and see if the code returns after a test drive.
• Consult Technical Service Bulletins (TSBs): Check for any TSBs related to the U1642 code for your specific vehicle make and model. Manufacturers may have specific fixes or updates for known issues.
• Professional Diagnosis: If the issue persists after performing the above steps, consider seeking help from a professional mechanic or dealership. They may have specialized tools and knowledge to diagnose BCM communication issues more effectively.Conclusion Troubleshooting a U1642 code can be complex, as it often involves multiple systems and components. Following these steps systematically can help identify the root cause of the communication failure. Always refer to the vehicle’s service manual for specific procedures and specifications related to your vehicle.