U1759 – Module Communication Failure

The ODBII code U1759 indicates a “Module Communication Failure,” meaning there is a problem with communication between the vehicle’s control modules, which may affect their ability to exchange data properly.

The severity of ODBII code U1759 is moderate.

Common Causes For: U1758 U1758: “Module Communication Failure”

• Faulty wiring or connectors
• Failed or malfunctioning module
• Poor ground connections
• Communication network issues (CAN bus problems)
• Corroded or damaged terminals
• Software or firmware issues
• Intermittent electrical connections
• Low battery voltage or power supply issues

Common misdiagnosis for U1759 U1759: “Module Communication Failure”

• Faulty wiring or connectors
• Defective control module
• Software issues or updates needed
• Battery or power supply problems
• Grounding issues
• Intermittent communication issues
• Other communication protocol failures

Common Troubleshooting Steps

The OBD-II code U1759 indicates a “Module Communication Failure,” which typically means that there is a problem with communication between various control modules in the vehicle. Here are some common troubleshooting steps to diagnose and resolve this issue:

• Check for Other Codes: Use an OBD-II scanner to check for any other trouble codes that may be present. Sometimes, multiple codes can provide more context for the issue.
• Inspect Wiring and Connectors:
• Visually inspect the wiring and connectors associated with the affected modules. Look for signs of damage, corrosion, or loose connections.
• Pay special attention to the ground connections, as poor grounding can lead to communication issues.
• Check Power Supply:
• Ensure that the affected modules are receiving the proper voltage. Use a multimeter to check the power supply to the modules.
• Look for blown fuses that may affect the power supply to the modules.
• Test Communication Lines:
• Use a scan tool to check the communication lines (CAN bus, LIN bus, etc.) for continuity and proper voltage levels.
• If you have access to an oscilloscope, you can check the signal waveforms on the communication lines to ensure they are functioning correctly.
• Inspect Modules:
• If possible, check the affected module for any signs of damage or malfunction. This may involve removing the module and inspecting it physically.
• If you suspect a module is faulty, you may need to replace it or reprogram it.
• Perform a Network Test:
• Some advanced scan tools can perform a network test to identify communication issues between modules. This can help pinpoint which module is causing the problem.
• Reset the Codes:
• After performing the above checks and repairs, clear the trouble codes using the OBD-II scanner and take the vehicle for a test drive to see if the code returns.
• Consult Technical Service Bulletins (TSBs):
• Check for any TSBs related to the specific make and model of the vehicle. Manufacturers may have issued guidance on common communication issues.
• Seek Professional Help:
• If the issue persists after performing these steps, it may be necessary to consult a professional mechanic or technician who has experience with automotive electronics and communication systems. By following these steps, you should be able to identify and resolve the underlying cause of the U1759 code.