U1772 – Control Module Communication Failure

The ODBII code U1772 indicates a “Control Module Communication Failure,” meaning there is a problem with communication between the vehicle’s control modules, which can affect various systems and functions.

The severity of ODBII code U1772 is moderate to high.

Common Causes For: U1770 U1770: ECM/TCM Communication Failure

• Faulty control module
• Poor electrical connections
• Damaged wiring harness
• Corroded connectors
• Software issues or bugs
• Faulty communication network (CAN bus)
• Low battery voltage
• Interference from aftermarket devices

Common misdiagnosis for U1772 U1772: “Control Module Communication Failure”

• Faulty control module
• Wiring issues
• Poor ground connections
• Corrupted software/firmware
• Faulty sensors
• Communication network issues (CAN bus problems)
• Battery or power supply issues
• Intermittent connection problems

Common Troubleshooting Steps

The OBD-II code U1772 indicates a “Control Module Communication Failure.” This code typically suggests that there is a problem with communication between various control modules in the vehicle. Here are some common troubleshooting steps to diagnose and resolve this issue:

• Check for Additional Codes: Use an OBD-II scanner to check for any other trouble codes that may be present. Sometimes, multiple codes can provide more context for the issue.
• Inspect Wiring and Connectors: Visually inspect the wiring and connectors associated with the control modules. Look for signs of damage, corrosion, or loose connections.
• Pay special attention to the wiring harnesses that connect the affected modules.
• Check Power and Ground: Ensure that the control modules have proper power and ground connections. Use a multimeter to check voltage and ground continuity.
• Verify that the fuses related to the control modules are intact.
• Test Control Modules: If possible, test the affected control modules individually. This may involve using specialized diagnostic tools or software to communicate with the modules.
• If a specific module is unresponsive, it may need to be replaced.
• Inspect the CAN Bus: The Controller Area Network (CAN) bus is responsible for communication between modules. Check for any issues with the CAN bus wiring, such as shorts or opens.
• Use an oscilloscope to monitor the CAN bus signals if you have access to one.
• Check for Software Updates: Sometimes, communication issues can be resolved with a software update. Check with the vehicle manufacturer for any available updates for the control modules.
• Clear Codes and Test Drive: After performing any repairs or inspections, clear the trouble codes using the OBD-II scanner and take the vehicle for a test drive to see if the code returns.
• Consult Technical Service Bulletins (TSBs): Look for any TSBs related to the specific make and model of the vehicle. Manufacturers may have issued guidance on common communication issues.
• Seek Professional Help: If the issue persists after performing the above steps, it may be necessary to consult a professional mechanic or technician who has experience with the specific vehicle and its control systems.Conclusion Troubleshooting a U1772 code can be complex due to the nature of control module communication. Following these steps systematically can help identify and resolve the underlying issue. Always refer to the vehicle’s service manual for specific procedures and specifications.