U1792 – Control Module Communication Failure

The ODBII code U1792 indicates a “Control Module Communication Failure,” meaning there is a problem with communication between the vehicle’s control modules, which can affect various systems and functions.

The severity of ODBII code U1792 is moderate.

Common Causes For: U1791 U1791: Communication Network Malfunction

• Faulty control module
• Poor electrical connections
• Damaged wiring harness
• Corroded connectors
• Software issues or bugs
• Low battery voltage
• Faulty CAN bus communication
• Interference from aftermarket devices
• Grounding issues
• Failed or malfunctioning sensors

Common misdiagnosis for U1792 U1792: “Control Module Communication Failure”

• Faulty control module
• Wiring issues
• Poor ground connections
• Corrupted software or firmware
• Faulty sensors
• Communication network issues (CAN bus problems)
• Battery or power supply issues
• Intermittent connection problems

Common Troubleshooting Steps

The OBD-II code U1792 indicates a “Control Module Communication Failure.” This code typically suggests that there is a problem with communication between the vehicle’s control modules. Here are some common troubleshooting steps to diagnose and resolve this issue:

• Check for Other Codes: Use an OBD-II scanner to check for any additional trouble codes. Sometimes, other codes can provide context or lead to the root cause of the communication failure.
• Inspect Wiring and Connectors:
• Visually inspect the wiring and connectors associated with the control modules. Look for signs of damage, corrosion, or loose connections.
• Pay special attention to the wiring harnesses that connect the affected modules.
• Check Power and Ground:
• Ensure that the control modules have proper power and ground connections. Use a multimeter to check voltage and ground continuity.
• If a module is not receiving power or ground, trace the circuit back to find the issue.
• Test Control Modules:
• If possible, test the affected control modules individually. This may involve swapping with a known good module or using a diagnostic tool to check module functionality.
• Some modules may have self-diagnostic capabilities that can provide additional information.
• Inspect the CAN Bus:
• The Controller Area Network (CAN) bus is responsible for communication between modules. Check for any issues with the CAN bus wiring, such as shorts, opens, or interference.
• Use an oscilloscope to monitor the CAN bus signals if you have access to one.
• Check for Software Updates:
• Sometimes, communication issues can be resolved with a software update. Check with the vehicle manufacturer for any available updates for the control modules.
• Clear Codes and Test Drive:
• After performing any repairs or adjustments, clear the trouble codes and take the vehicle for a test drive to see if the code reappears.
• Consult Service Manual:
• Refer to the vehicle’s service manual for specific diagnostic procedures related to the U1792 code. This may provide additional insights or steps tailored to your vehicle’s make and model.
• Professional Diagnosis:
• If the issue persists after performing the above steps, consider seeking help from a professional mechanic or dealership. They may have specialized diagnostic tools and experience with your specific vehicle. By following these steps, you should be able to identify and resolve the underlying issue causing the U1792 code.