U1832 – Control Module Communication Failure

The ODBII code U1832 indicates a “Control Module Communication Failure,” meaning there is a problem with communication between control modules in the vehicle’s network.

The severity of ODBII code U1832 is moderate.

Common Causes For: U1831 U1831: “Module Communication Failure”

• Faulty control module
• Damaged wiring or connectors
• Poor ground connections
• Corroded terminals
• Communication network issues (CAN bus problems)
• Software or firmware issues
• Intermittent electrical connections
• Low battery voltage or power supply issues

Common misdiagnosis for U1832 U1832: “Control Module Communication Failure”

• Faulty control module
• Wiring issues
• Poor ground connections
• Corrupted software/firmware
• Faulty sensors
• Communication network issues (CAN bus problems)
• Battery or power supply issues
• Intermittent connection problems

Common Troubleshooting Steps

The OBD-II code U1832 indicates a “Control Module Communication Failure.” This code typically suggests that there is a problem with communication between various control modules in the vehicle. Here are some common troubleshooting steps to diagnose and resolve this issue:

• Check for Additional Codes: Use an OBD-II scanner to check for any other trouble codes that may be present. Sometimes, multiple codes can provide more context for the issue.
• Inspect Wiring and Connectors: Visually inspect the wiring and connectors associated with the control modules. Look for signs of damage, corrosion, or loose connections.
• Pay special attention to the wiring harnesses that connect the affected modules.
• Check Power and Ground: Ensure that the control modules have proper power and ground connections. Use a multimeter to check voltage and ground continuity.
• Verify that the fuses related to the control modules are intact.
• Test Control Modules: If possible, test the affected control modules individually to ensure they are functioning correctly. This may involve using specialized diagnostic tools or software.
• If a specific module is identified as faulty, consider replacing it.
• Inspect the CAN Bus: The communication between control modules often occurs over a Controller Area Network (CAN) bus. Check for issues with the CAN bus wiring, such as shorts or opens.
• Use an oscilloscope to monitor the CAN bus signals if you have access to one.
• Check for Interference: Look for any aftermarket devices or modifications that may interfere with the communication between control modules. This includes alarm systems, stereo systems, or other electronic devices.
• Perform a Network Test: Some advanced diagnostic tools can perform a network test to check the communication between modules. This can help identify which module is not communicating properly.
• Clear Codes and Test Drive: After performing the above checks and repairs, clear the trouble codes using the OBD-II scanner and take the vehicle for a test drive to see if the code returns.
• Consult Service Manual: Refer to the vehicle’s service manual for specific troubleshooting steps related to the U1832 code and the control modules involved.
• Seek Professional Help: If the issue persists after performing these steps, it may be necessary to consult a professional mechanic or technician who has experience with the specific make and model of your vehicle. By following these troubleshooting steps, you should be able to identify and resolve the underlying issue causing the U1832 code.