U1967 – Lost Communication with the Hybrid Powertrain Control Module (HPCM).

The ODBII code U1967 indicates that there is a communication failure between the vehicle’s onboard computer and the Hybrid Powertrain Control Module (HPCM), which may affect the operation of the hybrid system.

The severity of ODBII code U1967 is generally considered moderate to high.

Common Causes For: U1966 Lost Communication with the Body Control Module (BCM).

• Faulty Hybrid Powertrain Control Module (HPCM)
• Damaged or corroded wiring or connectors
• Poor ground connections
• Failed communication network (CAN bus issues)
• Low battery voltage or weak battery
• Faulty or disconnected sensors related to the hybrid system
• Software issues or programming errors in the HPCM
• Intermittent electrical issues or shorts in the system

Common misdiagnosis for U1967 Lost Communication with the Hybrid Powertrain Control Module (HPCM)”.

• Faulty wiring or connectors
• Defective Hybrid Powertrain Control Module (HPCM)
• Issues with the Engine Control Module (ECM)
• Battery or charging system problems
• Faulty sensors (e.g., temperature, pressure)
• Communication issues with other control modules
• Software or firmware issues in the HPCM or ECM
• Grounding problems in the electrical system

Common Troubleshooting Steps

When dealing with the OBD-II code U1967, which indicates “Lost Communication with the Hybrid Powertrain Control Module (HPCM),” there are several common troubleshooting steps you can follow to diagnose and potentially resolve the issue. Here’s a structured approach:

• Check for Other Codes: Use an OBD-II scanner to check for any additional trouble codes. Other codes may provide more context or indicate related issues.
• Inspect the Wiring and Connectors: **Visual Inspection: Check the wiring harness and connectors related to the HPCM for any signs of damage, corrosion, or loose connections.
• **Connector Pins: Ensure that the pins in the connectors are not bent, corroded, or pushed back.
• Check Power and Ground: **Power Supply: Verify that the HPCM is receiving the correct voltage. Use a multimeter to check the power supply to the module.
• **Ground Connections: Ensure that the ground connections for the HPCM are secure and free of corrosion.
• Inspect the HPCM: **Module Condition: Check the HPCM for any physical damage or signs of water intrusion.
• **Reprogramming: If the module is suspected to be faulty, consider reprogramming or updating the software if applicable.
• Check Communication Lines: **CAN Bus: Inspect the Controller Area Network (CAN) bus lines for continuity and resistance. A break or short in the communication lines can cause communication issues.
• **Network Integrity: Use a scan tool to monitor the communication between modules. If other modules are not communicating, the issue may be with the network itself.
• Test the HPCM: If possible, test the HPCM in another vehicle (if you have access to one) to determine if the module is functioning correctly.
• Check for Interference: Look for any aftermarket accessories or modifications that may interfere with the vehicle’s electrical system.
• Clear Codes and Test Drive: After performing the above checks and repairs, clear the codes using the OBD-II scanner and take the vehicle for a test drive to see if the code returns.
• Consult Technical Service Bulletins (TSBs): Check for any TSBs related to the HPCM or communication issues for your specific vehicle make and model. Manufacturers may have specific fixes or updates.
• Seek Professional Help: If the issue persists after performing these steps, it may be necessary to consult a professional mechanic or dealership for further diagnosis.Conclusion Troubleshooting OBD-II code U1967 involves a systematic approach to check for wiring issues, module functionality, and communication integrity. Always ensure safety precautions are taken when working on hybrid vehicles, as they contain high-voltage components.