U2393 – Lost Communication with the Steering Angle Sensor.

The ODBII code U2393 indicates a loss of communication with the steering angle sensor, which may affect the vehicle’s stability control and steering functions.

The severity of ODBII code U2393 is generally considered moderate to high.

Common Causes For: U2392 Lost Communication with the Steering Angle Sensor.

• Faulty steering angle sensor
• Damaged wiring or connectors
• Poor electrical connections
• Malfunctioning power supply to the sensor
• Software issues or calibration errors
• Faulty vehicle control module (VCM) or electronic control unit (ECU)

Common misdiagnosis for U2393 Lost Communication with the Steering Angle Sensor.

• Faulty steering angle sensor
• Wiring issues or damaged connectors
• Faulty steering column module
• Malfunctioning electronic stability control (ESC) system
• Issues with the vehicle’s body control module (BCM)
• Problems with the power steering system
• Faulty ABS module
• Incorrectly calibrated steering angle sensor

Common Troubleshooting Steps

When dealing with the OBD-II code U2393, which indicates “Lost Communication with the Steering Angle Sensor,” there are several common troubleshooting steps you can follow to diagnose and potentially resolve the issue. Here’s a structured approach:

• Check for Other Codes: Use an OBD-II scanner to check for any additional trouble codes. Sometimes, multiple codes can provide more context about the issue.
• Inspect Wiring and Connectors: **Visual Inspection: Check the wiring harness and connectors associated with the steering angle sensor for any signs of damage, corrosion, or loose connections.
• **Connector Pins: Ensure that the pins in the connectors are not bent, corroded, or pushed back.
• Test the Steering Angle Sensor: **Sensor Functionality: If possible, test the steering angle sensor using a multimeter or scan tool to ensure it is functioning correctly. Check for proper voltage and resistance values as specified in the vehicle’s service manual.
• **Calibration: Some vehicles require the steering angle sensor to be calibrated after installation or repair. Check if calibration is necessary.
• Check Power and Ground: Verify that the steering angle sensor is receiving the correct voltage and that the ground connection is solid. Use a multimeter to check for power at the sensor connector.
• Inspect the CAN Bus: Since the steering angle sensor communicates over the CAN (Controller Area Network) bus, check for issues with the CAN bus wiring. Look for shorts, opens, or other faults in the wiring.
• Use a scan tool to monitor the CAN bus for communication issues.
• Check for Software Updates: Sometimes, manufacturers release software updates that can resolve communication issues. Check if there are any updates available for the vehicle’s ECU.
• Clear Codes and Test Drive: After performing the above checks and repairs, clear the trouble codes using the OBD-II scanner and take the vehicle for a test drive to see if the code returns.
• Consult Technical Service Bulletins (TSBs): Look for any TSBs related to the steering angle sensor or communication issues for your specific vehicle make and model. Manufacturers may have specific fixes or recommendations.
• Professional Diagnosis: If the issue persists after performing the above steps, consider seeking help from a professional mechanic or dealership. They may have specialized tools and knowledge to diagnose the problem more effectively.Conclusion By following these troubleshooting steps, you can systematically identify and resolve the issue related to the U2393 code. Always refer to the vehicle’s service manual for specific procedures and specifications related to your vehicle.