U2395 – Lost Communication with the Hybrid Powertrain Control Module (HPCM) A.

The ODBII code U2395 indicates a loss of communication with the Hybrid Powertrain Control Module (HPCM) A, which may affect the vehicle’s hybrid system functionality.

The severity of ODBII code U2395 is typically considered moderate to severe.

Common Causes For: U2394 Lost Communication with the Steering Angle Sensor.

• Faulty Hybrid Powertrain Control Module (HPCM)
• Damaged or corroded wiring or connectors
• Poor ground connection
• Communication network issues (CAN bus problems)
• Blown fuses
• Software or firmware issues
• Battery or power supply problems

Common misdiagnosis for U2395 Lost Communication with the Hybrid Powertrain Control Module (HPCM) A.

• Faulty wiring or connectors
• Defective Hybrid Powertrain Control Module (HPCM)
• Issues with the Engine Control Module (ECM)
• Battery or power supply problems
• Faulty sensors related to the hybrid system
• Communication issues with other control modules
• Software or firmware issues in the HPCM or ECM

Common Troubleshooting Steps

When dealing with OBD-II code U2395, which indicates “Lost Communication with the Hybrid Powertrain Control Module (HPCM) A,” there are several common troubleshooting steps you can follow to diagnose and potentially resolve the issue. Here’s a structured approach:

• Check for Other Codes: Use an OBD-II scanner to check for any additional trouble codes. Sometimes, related codes can provide more context for the issue.
• Inspect the Wiring and Connectors: **Visual Inspection: Check the wiring harness and connectors related to the HPCM for any signs of damage, corrosion, or loose connections.
• **Connector Pins: Ensure that the pins in the connectors are not bent, corroded, or damaged.
• Check Power and Ground: **Power Supply: Verify that the HPCM is receiving the correct voltage. Use a multimeter to check the power supply to the module.
• **Ground Connections: Ensure that the ground connections for the HPCM are secure and free of corrosion.
• Inspect the HPCM: If possible, check the HPCM itself for any signs of physical damage or water intrusion.
• If the module is removable, consider reseating it to ensure a good connection.
• Check Communication Lines: Use a scan tool to check for communication between the HPCM and other modules in the vehicle. If other modules are also not communicating, the issue may be with the communication bus (CAN bus).
• Inspect the CAN bus wiring for shorts, opens, or other issues.
• Test the HPCM: If you have access to a compatible scan tool, perform a functional test of the HPCM to see if it responds to commands.
• If the HPCM is not responding, it may need to be replaced.
• Check for Software Updates: Sometimes, manufacturers release software updates for the HPCM. Check with the dealership or manufacturer to see if there are any updates available.
• Clear Codes and Test Drive: After performing the above checks and repairs, clear the trouble codes and take the vehicle for a test drive to see if the code returns.
• Consult Technical Service Bulletins (TSBs): Look for any TSBs related to the HPCM or communication issues for your specific vehicle make and model. These can provide valuable insights into known issues and fixes.
• Professional Diagnosis: If the issue persists after performing the above steps, it may be necessary to consult a professional mechanic or dealership for further diagnosis. They may have specialized tools and knowledge to address complex issues. By following these steps, you can systematically troubleshoot the U2395 code and identify the root cause of the communication issue with the Hybrid Powertrain Control Module.