U2446 – Control Module Communication Error

The ODBII code U2446 indicates a communication error between control modules in a vehicle, suggesting that one or more modules are unable to exchange data properly.

Moderate.

Common Causes For: U2440: Control Module Communication Error

• Faulty control module
• Poor or damaged wiring/connectors
• Corrupted software or firmware in the control module
• Communication network issues (CAN bus problems)
• Low battery voltage or power supply issues
• Grounding issues
• Interference from aftermarket devices or modifications

Common misdiagnosis for U2446: Control Module Communication Error

• Faulty control module
• Wiring issues or shorts
• Poor ground connections
• Corrupted software or firmware
• Faulty connectors or terminals
• Battery or charging system problems
• Intermittent communication issues
• Other communication protocol errors

Common Troubleshooting Steps

The OBD-II code **U2446: Control Module Communication Error** indicates a communication issue between control modules in a vehicle’s network. This can be caused by various factors, including wiring issues, faulty modules, or software problems. Here are some common troubleshooting steps to diagnose and resolve this issue:

• Check for Additional Codes: Use an OBD-II scanner to check for any other trouble codes that may be present. This can provide more context and help identify the root cause of the communication error.
• Inspect Wiring and Connectors:
• Visually inspect the wiring and connectors associated with the control modules involved. Look for signs of damage, corrosion, or loose connections.
• Pay special attention to the ground connections, as poor grounding can lead to communication issues.
• Check Control Module Functionality:
• If possible, test the functionality of the control modules involved in the communication. This may require specialized diagnostic tools or equipment.
• If a specific module is suspected to be faulty, consider replacing it or reprogramming it if necessary.
• Verify Power Supply:
• Ensure that the control modules are receiving the proper voltage and ground. Use a multimeter to check the power supply to the modules.
• Look for blown fuses that may affect the power supply to the control modules.
• Inspect the CAN Bus:
• If the vehicle uses a Controller Area Network (CAN) bus, check for issues with the bus itself. This includes inspecting the CAN bus wiring for shorts, opens, or interference.
• Use a CAN bus diagnostic tool to monitor the communication on the bus and identify any anomalies.
• Perform a Network Test:
• Some advanced diagnostic tools can perform a network test to check the communication between modules. This can help identify which module is not communicating properly.
• Update Software/Firmware:
• Check if there are any software or firmware updates available for the control modules. Sometimes, communication issues can be resolved with an update.
• Clear Codes and Test Drive:
• After performing the above checks and repairs, clear the trouble codes using the OBD-II scanner and take the vehicle for a test drive to see if the code reappears.
• Consult Service Manual:
• Refer to the vehicle’s service manual for specific diagnostic procedures related to the U2446 code and the control modules involved.
• Seek Professional Help:
• If the issue persists after performing these steps, it may be necessary to consult a professional mechanic or technician who has experience with the specific vehicle make and model. By following these troubleshooting steps, you can systematically identify and resolve the underlying cause of the U2446 code.