U2595 – Lost Communication with the Steering Angle Sensor.

The ODBII code U2595 indicates a loss of communication with the steering angle sensor, which may affect the vehicle’s stability control and steering functions.

The severity of ODBII code U2595 is moderate.

Common Causes For: U2594 Lost Communication with the Steering Angle Sensor.

• Faulty steering angle sensor
• Damaged wiring or connectors
• Poor electrical connections
• Malfunctioning power supply to the sensor
• Software issues or calibration errors
• Faulty vehicle control module (VCM) or electronic control unit (ECU)

Common misdiagnosis for U2595 Lost Communication with the Steering Angle Sensor.

• Faulty Steering Angle Sensor
• Wiring Issues or Short Circuits
• Faulty Body Control Module (BCM)
• Faulty Electronic Power Steering (EPS) Module
• Incorrectly Calibrated Steering Angle Sensor
• Faulty ABS Module
• Issues with the CAN Bus Communication
• Battery or Power Supply Problems

Common Troubleshooting Steps

When dealing with OBD-II code U2595, which indicates “Lost Communication with the Steering Angle Sensor,” there are several common troubleshooting steps you can follow to diagnose and potentially resolve the issue. Here’s a structured approach:

• Check for Other Codes: Use an OBD-II scanner to check for any additional trouble codes. Other codes may provide more context or indicate related issues.
• Inspect Wiring and Connectors: **Visual Inspection: Check the wiring harness and connectors associated with the steering angle sensor for any signs of damage, corrosion, or loose connections.
• **Connector Pins: Ensure that the pins in the connectors are not bent, corroded, or pushed back.
• Test the Steering Angle Sensor: **Sensor Functionality: If possible, test the steering angle sensor using a multimeter or scan tool to ensure it is functioning correctly. Check for proper voltage and resistance values as specified in the vehicle’s service manual.
• **Calibration: Some vehicles require the steering angle sensor to be calibrated after installation or repair. Check if calibration is necessary.
• Check the CAN Bus Communication: **Network Integrity: Inspect the CAN bus wiring for shorts, opens, or other issues. Use a scan tool to monitor the communication between modules.
• **Module Functionality: Ensure that other modules on the CAN bus are functioning correctly, as a failure in one module can affect communication.
• Inspect the Power and Ground: **Power Supply: Verify that the steering angle sensor is receiving the correct voltage. Check the vehicle’s wiring diagrams for the correct power and ground locations.
• **Ground Connections: Ensure that all ground connections are clean and secure.
• Check for Software Updates: **ECU Updates: Check if there are any software updates available for the vehicle’s ECU that may address communication issues.
• Clear Codes and Test Drive: After performing the above checks and repairs, clear the trouble codes using the OBD-II scanner and take the vehicle for a test drive to see if the code returns.
• Replace the Steering Angle Sensor: If all other troubleshooting steps fail and the sensor is confirmed to be faulty, consider replacing the steering angle sensor.
• Consult Technical Service Bulletins (TSBs): Look for any TSBs related to the steering angle sensor or communication issues for your specific vehicle make and model.
• Seek Professional Help: If you are unable to resolve the issue after these steps, it may be best to consult a professional mechanic or technician who has experience with your vehicle’s systems. By following these steps, you should be able to identify and address the cause of the U2595 code effectively.