U2629 – Invalid Data Received from Vehicle Dynamics Control Module.

The ODBII code U2629 indicates that the vehicle’s control module has received invalid or erroneous data from the Vehicle Dynamics Control Module, which may affect the vehicle’s stability and handling systems.

The severity of ODBII code U2629 is generally considered moderate.

Common Causes For: U2628 Invalid Data Received from the Steering Angle Sensor.

• Faulty Vehicle Dynamics Control Module (VDCM)
• Poor or damaged wiring/connectors between the VDCM and the ECU
• Corrupted or incompatible software in the VDCM
• Faulty sensors related to vehicle dynamics (e.g., wheel speed sensors)
• Communication issues within the CAN bus network
• Low battery voltage or electrical system issues
• Grounding issues affecting the VDCM or related components

Common misdiagnosis for U2629 Invalid Data Received from Vehicle Dynamics Control Module.

• Faulty ABS module
• Defective wheel speed sensors
• Malfunctioning traction control system
• Issues with the powertrain control module (PCM)
• Wiring or connector problems
• Faulty vehicle dynamics control module (VDCM)
• Incorrect tire sizes or pressures
• Software or calibration issues in the control modules

Common Troubleshooting Steps

The OBD-II code U2629 indicates that there is an issue with the communication between the vehicle’s control modules, specifically related to the Vehicle Dynamics Control Module (VDCM). This code typically suggests that the VDCM is sending invalid data to the other modules in the vehicle. Here are some common troubleshooting steps to diagnose and resolve the issue:

• Check for Additional Codes: Use an OBD-II scanner to check for any other trouble codes that may be present. Addressing related codes can help in diagnosing the root cause.
• Inspect Wiring and Connectors: **Visual Inspection: Check the wiring harness and connectors associated with the VDCM for any signs of damage, corrosion, or loose connections.
• **Repair or Replace: Repair any damaged wires or connectors and ensure that all connections are secure.
• Check Power and Ground: **Power Supply: Verify that the VDCM is receiving the correct voltage. Use a multimeter to check the power supply to the module.
• **Ground Connection: Ensure that the ground connection for the VDCM is solid and free of corrosion.
• Inspect the Vehicle Dynamics Control Module: **Module Functionality: If possible, test the VDCM to ensure it is functioning correctly. This may require specialized diagnostic equipment.
• **Software Updates: Check if there are any software updates available for the VDCM that may address known issues.
• Check for Communication Issues: **CAN Bus Communication: Use a scan tool to monitor the CAN bus communication. Look for any interruptions or errors in communication between the VDCM and other modules.
• **Network Integrity: Ensure that the CAN bus wiring is intact and that there are no shorts or opens in the network.
• Clear Codes and Test Drive: After performing the above checks and repairs, clear the trouble codes using the OBD-II scanner.
• Take the vehicle for a test drive to see if the code reappears. Monitor the vehicle’s performance and any warning lights.
• Consult Technical Service Bulletins (TSBs): Check for any TSBs related to the U2629 code or the VDCM for your specific vehicle make and model. Manufacturers may have issued guidance on common issues and fixes.
• Professional Diagnosis: If the issue persists after performing the above steps, consider seeking help from a professional mechanic or dealership. They may have access to advanced diagnostic tools and resources.Conclusion Troubleshooting the U2629 code involves a systematic approach to check for wiring issues, module functionality, and communication integrity. By following these steps, you can identify and resolve the underlying problem effectively.