U2642 – Invalid Data Received from Vehicle Dynamics Control Module.

The ODBII code U2642 indicates that the vehicle’s control module has received invalid or corrupted data from the Vehicle Dynamics Control Module, which may affect the vehicle’s stability and handling systems.

The severity of ODBII code U2642 is generally considered moderate.

Common Causes For: U2641 Lost Communication with the Steering Angle Sensor.

• Faulty Vehicle Dynamics Control Module (VDCM)
• Poor or damaged wiring/connectors between the VDCM and the ECU
• Corrupted or incompatible software in the VDCM
• Faulty sensors related to vehicle dynamics (e.g., wheel speed sensors)
• Communication issues in the CAN bus network
• Low battery voltage or electrical system issues
• Grounding issues affecting the VDCM or related components

Common misdiagnosis for U2642 Invalid Data Received from Vehicle Dynamics Control Module.

• Faulty Vehicle Dynamics Control Module
• Wiring issues or short circuits in the communication lines
• Faulty wheel speed sensors
• Incorrectly diagnosed ABS module issues
• Power supply problems to the control module
• Software or firmware issues in the control module
• Misinterpretation of other related codes
• Faulty connectors or terminals in the communication circuit

Common Troubleshooting Steps

The OBD-II code U2642 indicates that there is an issue with the communication between the vehicle’s control modules, specifically related to the Vehicle Dynamics Control Module (VDCM). This code typically suggests that the VDCM is sending invalid data to the other modules in the vehicle. Here are some common troubleshooting steps to diagnose and resolve the issue:

• Check for Additional Codes:
• Use an OBD-II scanner to check for any other trouble codes that may be present. Addressing related codes can help in diagnosing the root cause.
• Inspect Wiring and Connectors:
• Visually inspect the wiring and connectors associated with the VDCM and other related modules. Look for signs of damage, corrosion, or loose connections.
• Check for Ground Issues:
• Ensure that the ground connections for the VDCM and other related modules are secure and free of corrosion. Poor grounding can lead to communication issues.
• Test the VDCM:
• If possible, test the VDCM for proper operation. This may involve using a multimeter to check voltage and ground signals or using a specialized scan tool to access live data from the module.
• Inspect Other Modules:
• Check other control modules that communicate with the VDCM. If one of these modules is malfunctioning, it could affect the data received from the VDCM.
• Check for Software Updates:
• Verify if there are any software updates available for the vehicle’s control modules. Sometimes, manufacturers release updates to fix communication issues.
• Clear Codes and Test Drive:
• After performing any repairs or inspections, clear the trouble codes and take the vehicle for a test drive to see if the code reappears.
• Consult Technical Service Bulletins (TSBs):
• Look for any TSBs related to the U2642 code or the VDCM for your specific vehicle make and model. Manufacturers may have documented common issues and fixes.
• Professional Diagnosis:
• If the issue persists after performing the above steps, consider seeking help from a professional mechanic or dealership. They may have access to advanced diagnostic tools and resources.
• Replace the VDCM:
• If all other troubleshooting steps fail and the VDCM is confirmed to be faulty, replacement of the module may be necessary. Always refer to the vehicle’s service manual for specific diagnostic procedures and specifications related to your vehicle model.