U2879 – Control Module Communication Bus Fault

The ODBII code U2879 indicates a communication fault on the control module communication bus, suggesting that there is a problem with the data exchange between control modules in the vehicle.

The severity of ODBII code U2879 is moderate.

Common Causes For: U2877 Lost Communication with the Steering Angle Sensor.

• Faulty control module
• Damaged wiring or connectors
• Poor ground connections
• Interference from other electronic devices
• Corroded or loose connections
• Software issues or bugs
• Faulty communication bus (CAN bus) components
• Low battery voltage or power supply issues

Common misdiagnosis for U2879 U2879: Control Module Communication Bus Fault

• Faulty control module
• Wiring issues
• Poor ground connections
• Corrupted software/firmware
• Faulty sensors
• Battery or power supply problems
• Intermittent connection issues
• Incorrectly configured aftermarket components

Common Troubleshooting Steps

The OBD-II code U2879 indicates a “Control Module Communication Bus Fault.” This code typically points to a communication issue between various control modules in the vehicle. Here are some common troubleshooting steps to diagnose and resolve this issue:

• Check for Additional Codes: Use an OBD-II scanner to check for any other related trouble codes. Sometimes, multiple codes can provide more context about the issue.
• Inspect Wiring and Connectors: Visually inspect the wiring and connectors associated with the control modules. Look for signs of damage, corrosion, or loose connections.
• Pay special attention to the communication bus wires (CAN bus) for any signs of wear or damage.
• Check for Short Circuits or Open Circuits: Use a multimeter to check for continuity in the communication lines. Look for any short circuits or open circuits that could be causing the communication failure.
• Test Control Modules: If possible, test the affected control modules to ensure they are functioning correctly. This may involve using specialized diagnostic tools or swapping modules with known good ones.
• Inspect Ground Connections: Ensure that all ground connections for the control modules are secure and free of corrosion. Poor grounding can lead to communication issues.
• Check for Interference: Look for any aftermarket devices or modifications that may interfere with the communication bus. This includes alarms, stereo systems, or other electronic devices.
• Update Software/Firmware: Check if there are any software or firmware updates available for the control modules. Sometimes, manufacturers release updates to fix communication issues.
• Clear Codes and Test Drive: After performing any repairs or adjustments, clear the trouble codes and take the vehicle for a test drive to see if the code reappears.
• Consult Service Manual: Refer to the vehicle’s service manual for specific diagnostic procedures related to the communication bus and control modules.
• Seek Professional Help: If the issue persists after performing the above steps, it may be necessary to consult a professional mechanic or technician who has experience with the specific vehicle make and model. By following these steps, you should be able to identify and resolve the underlying issue causing the U2879 code.