U2919 – Lost Communication with the Steering Angle Sensor.

The ODBII code U2919 indicates a loss of communication with the steering angle sensor, which may affect the vehicle’s stability control and steering functions.

The severity of ODBII code U2919 is moderate.

Common Causes For: U2918 Vehicle Communication Bus Malfunction

• Faulty steering angle sensor
• Damaged wiring or connectors
• Poor electrical connections
• Malfunctioning power supply to the sensor
• Software issues or calibration errors
• Faulty vehicle control module (VCM)
• Interference from other electronic components

Common misdiagnosis for U2919 Lost Communication with the Steering Angle Sensor.

• Faulty Steering Angle Sensor
• Wiring Issues or Short Circuits
• Faulty Body Control Module (BCM)
• Faulty Electronic Power Steering (EPS) Module
• Incorrectly Calibrated Steering Angle Sensor
• Faulty ABS Module
• Issues with the CAN Bus Communication
• Battery or Power Supply Problems

Common Troubleshooting Steps

When dealing with the OBD-II code U2919, which indicates “Lost Communication with the Steering Angle Sensor,” there are several common troubleshooting steps you can follow to diagnose and potentially resolve the issue. Here’s a structured approach:

• Check for Other Codes: Use an OBD-II scanner to check for any additional trouble codes. Sometimes, multiple codes can provide more context for the issue.
• Inspect Wiring and Connectors: **Visual Inspection: Check the wiring harness and connectors associated with the steering angle sensor for any signs of damage, corrosion, or loose connections.
• **Connector Pins: Ensure that the pins in the connectors are not bent, corroded, or pushed back.
• Test the Steering Angle Sensor: **Sensor Functionality: If possible, test the steering angle sensor using a multimeter or scan tool to ensure it is functioning correctly. Check for proper voltage and resistance values as specified by the manufacturer.
• **Calibration: Some vehicles require the steering angle sensor to be calibrated after installation or repair. Check if calibration is necessary.
• Check the CAN Bus Communication: **Network Integrity: Inspect the CAN bus wiring for shorts, opens, or other issues. Use a scan tool to monitor the communication between modules.
• **Module Functionality: Ensure that other modules on the CAN bus are functioning correctly, as a failure in one module can affect communication.
• Inspect the Power and Ground: **Power Supply: Verify that the steering angle sensor is receiving the correct voltage. Check the vehicle’s fuse box for any blown fuses related to the steering system.
• **Ground Connections: Ensure that the ground connections for the steering angle sensor are secure and free of corrosion.
• Check for Software Updates: **ECU Updates: Check if there are any software updates available for the vehicle’s ECU that may address communication issues.
• Clear Codes and Test Drive: After performing the above checks and repairs, clear the trouble codes using the OBD-II scanner and take the vehicle for a test drive to see if the code returns.
• Consult Technical Service Bulletins (TSBs): Look for any TSBs related to the steering angle sensor or communication issues for your specific vehicle make and model. Manufacturers may have specific fixes or recommendations.
• Professional Diagnosis: If the issue persists after performing the above steps, consider seeking help from a professional mechanic or dealership, as they may have specialized tools and knowledge to diagnose complex issues. By following these steps, you should be able to identify and resolve the issue related to the U2919 code. Always refer to the vehicle’s service manual for specific procedures and specifications.