Service and Cost
Typical Cost
150. Here are some factors that can influence the cost:1. Type of Vehicle: Luxury or high-performance vehicles may require more expensive brake fluid or additional labor, increasing the cost.
2. Service Provider: Dealerships often charge more than independent mechanics or chain service centers. However, they may offer specialized expertise or use OEM (Original Equipment Manufacturer) parts.
3. Location: Prices can vary significantly based on geographic location due to differences in labor rates and cost of living.
4. Brake Fluid Type: Some vehicles require specific types of brake fluid, which can be more expensive than standard options.
5. Additional Services: If the brake system requires additional repairs or maintenance, such as replacing worn-out brake pads or rotors, the overall cost will be higher.It's always a good idea to get multiple quotes from different service providers and ensure that the service includes a complete flush and replacement of the brake fluid to maintain optimal brake performance and safety.
Typical Service Procedure
1. Inspection of Brake Components: Before performing a brake flush, a technician will usually inspect the brake system components, including brake lines, hoses, calipers, wheel cylinders, and the master cylinder, to ensure there are no leaks or damage.
2. Removal of Old Brake Fluid: The old brake fluid is drained from the system. This can be done using a vacuum pump, pressure bleeder, or manually by bleeding the brakes. The goal is to remove as much of the old fluid as possible, which may have absorbed moisture and contaminants over time.
3. Flushing the System: New brake fluid is added to the system, and the brakes are bled to ensure that all old fluid and air bubbles are removed. This process is repeated until clean, new fluid is seen at each brake bleeder valve.
4. Refilling with New Brake Fluid: The brake fluid reservoir is filled with the appropriate type of new brake fluid, as specified by the vehicle manufacturer. It's important to use the correct type (e.g., DOT 3, DOT 4, or DOT 5. 1) to ensure compatibility and performance.5. Bleeding the Brakes: After refilling, the brake system is bled to remove any air that may have entered the system during the flush. This step is crucial to maintain proper brake pedal feel and braking performance.
6. Testing the Brake System: Once the flush is complete, the technician will test the brake system to ensure it is functioning correctly. This includes checking the brake pedal for firmness and ensuring there are no leaks in the system.
7. Disposal of Old Brake Fluid: The old brake fluid is disposed of properly, as it is considered hazardous waste and should not be poured down drains or onto the ground.A brake system flush does not typically involve replacing or repairing brake parts unless issues are identified during the inspection. If any components are found to be worn or damaged, additional repairs or replacements may be recommended.
What is a Brake System Flush?
A brake system flush is a maintenance procedure that involves removing the old brake fluid from a vehicle's brake system and replacing it with new fluid. This process is essential for maintaining the effectiveness and safety of the braking system.
Over time, brake fluid can absorb moisture from the air, which can lead to corrosion of brake components and a decrease in braking performance. Additionally, contaminated or degraded brake fluid can cause the brake pedal to feel spongy and reduce the overall responsiveness of the brakes.The key components involved in a brake system flush include:
1. Brake Fluid Reservoir: This is where the brake fluid is stored. During a flush, the old fluid is removed from the reservoir and replaced with new fluid.
2. Brake Lines and Hoses: These transport the brake fluid from the reservoir to the brake calipers or wheel cylinders. Flushing the system ensures that any old or contaminated fluid is removed from these lines.
3. Brake Calipers and Wheel Cylinders: These components apply pressure to the brake pads or shoes, which in turn press against the rotors or drums to slow down the vehicle. A flush ensures that these components are operating with clean fluid, which is crucial for optimal performance.
4. Master Cylinder: This is the component that generates hydraulic pressure when the brake pedal is pressed. A brake system flush helps maintain the master cylinder's efficiency by ensuring it is filled with clean fluid.
5. ABS (Anti-lock Braking System) Components: In vehicles equipped with ABS, the system includes additional components like the ABS pump and control module. A brake system flush helps maintain these components by preventing contamination and ensuring proper fluid flow.Overall, a brake system flush is a preventive maintenance task that helps ensure the longevity and reliability of a vehicle's braking system. It is typically recommended every 2 to 3 years, but the specific interval can vary based on the vehicle manufacturer's recommendations and driving conditions.
How It Works
- Get a quote online or set-up a time to have your vehicle looked at.
- Pick time slots that work for you, easily, online.
- We will confirm appointments and send reminders.
- Our mechanics bring everything that is needed to you.
- All you have to do is provided a safe area for the work to be performed.
What we need from you
- A safe place to work on your vehicle
- No working on the side of busy roads
- No working on unstable or steep surfaces.
- We do not perform repairs during severe weather.
- Authorization from a property owner or management.
- Repair work done in a parking lot or at your requires permission.
- We do not do repairs in areas restricted by law.
Common Questions
Service Area
Our primary service area is greater Grand Rapids and includes Comstock Park, East Grand Rapids, Grandville, Kentwood, Walker, and Wyoming
Our secondary service area is provided by our Belding location and includes: Belding, Greenville, Ionia and the sorrounding areas.
Contact us if you have any questions about where we provide services.
