Upper Fan Shroud
Labor: 0.5 hr ($62.50); Parts: $20–$50; Total: $82.50–$112.50
Lower Fan Shroud
Labor: 0.75 hr ($93.75); Parts: $40–$70; Total: $133.75–$163.75
Mounting Brackets
Labor: 0.25 hr ($31.25); Parts: $5–$15; Total: $36.25–$46.25
Shroud Clips/Retainers
Labor: 0.25 hr ($31.25); Parts: $2–$5; Total: $33.25–$36.25
Upper Fan Shroud
1.Inspectthe shroud for cracks or breaks around the edges and mounting points. 2.Removeany bolts or screws securing it to the radiator support. 3.Cleanaway debris or coolant residue. 4. If necessary,reinforcesmall cracks with a suitable plastic epoxy or replace the panel if damage is extensive. 5.Reinstallthe shroud assembly by aligning the mounting holes and tightening bolts or screws to the proper torque.
Lower Fan Shroud
1.Disconnectthe lower shroud from the radiator or fan assembly by removing any securing fasteners. 2.Checkfor cracks or distortions that could interfere with airflow. 3.Repairminor damage using plastic filler or epoxy; replace if the damage compromises structural integrity. 4.Refitthe lower shroud, ensuring all clips or bolts line up properly. 5.Tightenfasteners evenly and confirm the shroud is secure.
Mounting Tabs
1.Examinethe mounting tabs for signs of bending or snapping. 2.Straightenany bent tabs using appropriate tools. 3.Repairminor cracks with plastic welding or epoxy; if tabs are beyond repair, either replace the entire shroud or fabricate new tabs if possible. 4.Securethe tabs to the radiator support or fan assembly with the correct fasteners.
Retaining Clips
1.Locateall clips connecting the shroud to the radiator or other components. 2.Removedamaged or worn clips using trim or clip removal tools. 3.Cleanany debris or buildup from the mounting slots. 4.Installnew clips by aligning them with the slots and pressing firmly until locked in place. 5.Ensurethe shroud is securely held and does not rattle.
Shroud Seals or Gaskets
1.Checkfor any rubber seals or gaskets around the shroud’s edges. 2.Removeold, brittle seals using a scraper and clean the surface thoroughly. 3.Applyfresh sealant or attach a new gasket to ensure proper airflow and avoid coolant leaks. 4.Reinstallthe shroud and make certain the seal is seated properly against the radiator or fan housing.
Fan Shroud Hardware (Bolts and Screws)
1.Identifyall bolts and screws that secure the fan shroud. 2.Removeandinspecteach fastener for rust or stripped threads. 3.Cleanthread areas with penetrating oil or a wire brush to remove corrosion. 4.Replacedamaged or missing hardware with the correct size and grade. 5.Reattachthe shroud by tightening fasteners to the manufacturer’s torque specifications.
What is a Fan Shroud and what does it do
No content available for this section.
Upper Shroud Section
Cracks or splits: Visible damage due to age, heat, or impact can lead to reduced cooling efficiency.
Loose or missing fasteners: Shroud may rattle or move excessively, causing abnormal noise or poor airflow.
Warping: High engine temperatures can warp the plastic, reducing its effectiveness in directing airflow.
Lower Shroud Section
Physical damage: Scrapes or cracks from road debris can allow air to escape or bypass the cooling fan.
Brittle plastic: Over time and with repeated heat cycles, plastic can become brittle and prone to breaking.
Misalignment: If the lower shroud no longer lines up with the fan, it can cause uneven cooling and potential contact with the blades.
Mounting Brackets and Hardware
Loose bolts or screws: Rattling or vibration around the shroud can indicate hardware is not tight or has fallen out.
Corrosion or rust: Metal brackets may rust, compromising their strength and leading to shroud misalignment.
Broken clips: Plastic or metal clips can snap over time, leading to a shroud that shifts or vibrates.
Shroud Grommets and Seals
Deteriorated rubber: Cracked or hardened grommets can fail to hold the shroud firmly in place.
Air leaks: Damaged seals may cause hot air recirculation, reducing cooling efficiency.
Loose fit: If grommets or seals no longer fit tightly, the shroud can move or allow air to bypass the radiator.
Fan Opening or Aperture
Excessive wear: Edges may become worn, causing the fan blades to scrape against the shroud.
Uneven gap: A poorly aligned opening can reduce airflow and cause fan noise or vibration.
Cracked edges: Over time, high-speed fan rotation can stress the shroud and create fractures.
Loose or missing fasteners: Shroud may rattle or move excessively, causing abnormal noise or poor airflow.
Warping: High engine temperatures can warp the plastic, reducing its effectiveness in directing airflow.
Brittle plastic: Over time and with repeated heat cycles, plastic can become brittle and prone to breaking.
Misalignment: If the lower shroud no longer lines up with the fan, it can cause uneven cooling and potential contact with the blades.
Corrosion or rust: Metal brackets may rust, compromising their strength and leading to shroud misalignment.
Broken clips: Plastic or metal clips can snap over time, leading to a shroud that shifts or vibrates.
Air leaks: Damaged seals may cause hot air recirculation, reducing cooling efficiency.
Loose fit: If grommets or seals no longer fit tightly, the shroud can move or allow air to bypass the radiator.
Uneven gap: A poorly aligned opening can reduce airflow and cause fan noise or vibration.
Cracked edges: Over time, high-speed fan rotation can stress the shroud and create fractures.
How It Works
- Get a quote online or set-up a time to have your vehicle looked at.
- Pick time slots that work for you, easily, online.
- We will confirm appointments and send reminders.
- Our mechanics bring everything that is needed to you.
- All you have to do is provided a safe area for the work to be performed.
What we need from you
- A safe place to work on your vehicle
- No working on the side of busy roads
- No working on unstable or steep surfaces.
- We do not perform repairs during severe weather.
- Authorization from a property owner or management.
- Repair work done in a parking lot or at your requires permission.
- We do not do repairs in areas restricted by law.
Common Questions
Service Area
Our primary service area is greater Grand Rapids and includes Comstock Park, East Grand Rapids, Grandville, Kentwood, Walker, and Wyoming
Our secondary service area is provided by our Belding location and includes: Belding, Greenville, Ionia and the sorrounding areas.
Contact us if you have any questions about where we provide services.
