Common Electrical Repair Costs
Outlet Not Working
Typical repair time: 1-2 hours
Estimated cost: $125-$250
Includes diagnosis, replacement of faulty outlet or wiring repair if needed.
Circuit Breaker Issues
Typical repair time: 1-3 hours
Estimated cost: $125-$375
Includes testing, replacement of faulty breaker, and panel inspection.
Light Fixture Installation
Typical repair time: 1-2 hours
Estimated cost: $125-$250
Plus cost of fixture. Includes removal of old fixture and installation of new one.
Electrical Panel Upgrade
Typical repair time: 4-8 hours
Estimated cost: $500-$1,000
Plus materials. Includes upgrading service panel and necessary permits.
Ceiling Fan Installation
Typical repair time: 2-3 hours
Estimated cost: $250-$375
Plus cost of fan. Includes assembly and installation of new fan.
Whole House Surge Protection
Typical repair time: 2-3 hours
Estimated cost: $250-$375
Plus cost of surge protector. Includes installation and testing.
Electrical Troubleshooting
Typical repair time: 1-4 hours
Estimated cost: $125-$500
Varies based on complexity of the issue and required repairs.
GFCI Installation
Typical repair time: 1-2 hours
Estimated cost: $125-$250
Includes installation and testing of GFCI outlet.
Note: These are estimated costs based on our standard rate of $125/hour. Actual costs may vary depending on the specific situation, materials needed, and complexity of the repair. Additional charges may apply for emergency services or after-hours calls.
Common Electrical Problems and Repair Procedures
Circuit Breaker Keeps Tripping
Repair Procedure:
- Identify which circuit is affected and what devices are connected
- Unplug all devices on the affected circuit
- Reset the breaker completely (push to 'off' then to 'on')
- Inspect for signs of overloading or short circuits
- Test outlets with a multimeter
- Replace breaker if faulty
Flickering Lights
Repair Procedure:
- Check if problem affects multiple fixtures
- Inspect bulb connection and wattage
- Examine wire connections in fixture
- Test voltage stability
- Check main panel connections
- Replace loose wiring or damaged fixtures
Dead Outlets
Repair Procedure:
- Test outlet with circuit tester
- Check if GFCI outlet needs resetting
- Turn off power at breaker
- Remove outlet cover and inspect connections
- Test wires for proper voltage
- Replace outlet if faulty
- Restore power and test
Hot Outlets or Switches
Repair Procedure:
- Immediately unplug devices
- Turn off corresponding circuit breaker
- Check for signs of burning or melting
- Inspect wire connections
- Test for proper amperage
- Replace outlet/switch and damaged wiring
- Upgrade if necessary for load requirements
Electrical Surges
Repair Procedure:
- Document frequency of surges
- Inspect main service panel
- Test grounding system
- Check utility connection
- Install surge protectors
- Replace damaged wiring
- Upgrade electrical panel if necessary
High Electric Bill
Repair Procedure:
- Conduct energy audit
- Check for phantom loads
- Inspect insulation
- Test for current leakage
- Check appliance efficiency
- Replace outdated wiring
- Install energy-efficient solutions
Safety Note:Many electrical repairs should only be performed by licensed electricians. Attempting DIY electrical work can be dangerous and may violate local codes.
Contact our licensed electricians for professional diagnosis and repair of any electrical issues in your home or business.
Common Electrical Problems in Homes and Businesses
No content available for this section.
Signs of Electrical System Failure
Common Electric Problems & Maintenance Guide
Circuit Breaker Issues
Signs of Failure:
- Frequent tripping
- Burning smell near electrical panel
- Hot to touch
- Visible physical damage or corrosion
Service Schedule: Inspection every 3-5 years; replacement every 25-30 years
Outlet Problems
Signs of Failure:
- Sparking when plugging in devices
- Discoloration or scorch marks
- Loose or warm outlets
- Crackling sounds
- No power output
Service Schedule: Inspection annually; replacement every 15-20 years or when signs of wear appear
Wiring Issues
Signs of Failure:
- Flickering lights
- Burning smell
- Discolored wall plates
- Buzzing sounds
- Frequent circuit breaker trips
Service Schedule: Complete home wiring inspection every 3-4 years; older homes (40+ years) should be inspected annually
Light Switch Problems
Signs of Failure:
- Delayed response when switching
- Warm to touch
- Audible clicking or buzzing
- Loose feeling when operating
Service Schedule: Inspection annually; replacement every 15-20 years
Electrical Panel Issues
Signs of Failure:
- Rust or corrosion
- Strange noises from the panel
- Warm panel cover
- Burning odor
- Visible damage or loose components
Service Schedule: Professional inspection every 3 years; replacement every 25-40 years depending on panel type and condition
GFCI Outlet Problems
Signs of Failure:
- Frequent tripping
- Won't reset
- Test button doesn't work
- No power output
Service Schedule: Monthly self-testing recommended; professional inspection annually; replacement every 10-15 years
Note: These are general guidelines. Specific circumstances may require more frequent inspections or earlier replacement. Always consult a licensed electrician for professional advice.
How It Works
- Get a quote online or set-up a time to have your vehicle looked at.
- Pick time slots that work for you, easily, online.
- We will confirm appointments and send reminders.
- Our mechanics bring everything that is needed to you.
- All you have to do is provided a safe area for the work to be performed.
What we need from you
- A safe place to work on your vehicle
- No working on the side of busy roads
- No working on unstable or steep surfaces.
- We do not perform repairs during severe weather.
- Authorization from a property owner or management.
- Repair work done in a parking lot or at your requires permission.
- We do not do repairs in areas restricted by law.
Common Questions
Service Area
Our primary service area is greater Grand Rapids and includes Comstock Park, East Grand Rapids, Grandville, Kentwood, Walker, and Wyoming
Our secondary service area is provided by our Belding location and includes: Belding, Greenville, Ionia and the sorrounding areas.
Contact us if you have any questions about where we provide services.
