Blower Motor Switch Repair Cost Guide
Below are typical repair costs for common blower motor switch issues. Labor rate is $125/hour.
Basic Switch ReplacementA straightforward switch replacement typically takes 0.5-1 hour.
- Labor: $62.50-$125
- Parts: $30-$80
- Total Cost Range: $92.50-$205
When the switch and resistor pack need replacement, expect 1-1.5 hours of labor.
- Labor: $125-$187.50
- Parts: $40-$100
- Total Cost Range: $165-$287.50
For vehicles with electronic climate control systems, repair may take 1.5-2 hours.
- Labor: $187.50-$250
- Parts: $150-$400
- Total Cost Range: $337.50-$650
Note: Prices are estimates and may vary based on vehicle make/model and parts availability. Additional diagnostic time may be required in some cases.
Blower Motor Switch Repair Procedures
Manual Blower Switch
Common Symptoms:No fan speed control, intermittent operation, or stuck positions
Repair Steps:
- Remove dashboard trim panels to access the switch
- Disconnect the negative battery terminal
- Unplug electrical connectors from the switch
- Remove mounting screws or clips securing the switch
- Extract the old switch
- Install new switch in reverse order
- Test all speed settings before reassembling panels
Electronic Blower Control Module
Common Symptoms:Fan speeds not working, complete failure, or erratic operation
Repair Steps:
- Scan vehicle for diagnostic trouble codes
- Remove necessary trim panels
- Locate the electronic control module (usually behind the glove box)
- Disconnect battery
- Remove mounting screws and electrical connectors
- Replace module with new unit
- Clear any stored codes
- Perform system calibration if required
Climate Control Head Unit
Common Symptoms:Display issues, non-responsive buttons, or complete system failure
Repair Steps:
- Document radio and climate control settings
- Disconnect battery
- Remove trim pieces around control unit
- Disconnect electrical connectors
- Remove mounting screws/brackets
- Install new control unit
- Reconnect all components
- Program/calibrate new unit if required
- Test all functions thoroughly
Important Notes:
- Always verify proper voltage at the switch before replacement
- Check fuses and relays before component replacement
- Some vehicles require specialized programming after replacement
- Consider having a professional diagnosis for complex electronic issues
Note: Specific procedures may vary by vehicle make and model. Always consult your vehicle's service manual for exact specifications and procedures.
Understanding Blower Motor Switches
No content available for this section.
Common Failure Symptoms of Blower Motor Switch
Common Signs of Blower Motor Switch Failure & Maintenance Guide
Manual Blower Switch
Signs of Failure:
- Switch feels loose or wobbly when turned
- Fan speeds work intermittently
- Certain fan speeds stop working completely
- Burning smell when adjusting speeds
- Switch feels hot to touch
Service Schedule: No regular maintenance required, but should be inspected during routine HVAC service (typically twice yearly). Replace only when showing signs of failure.
Electronic Blower Switch
Signs of Failure:
- Digital display becomes dim or unresponsive
- Erratic fan speed changes
- Button inputs not registering
- System doesn't respond to temperature adjustments
- Strange clicking sounds from control panel
Service Schedule: Battery replacement every 1-2 years if battery-powered. Annual cleaning of contact points recommended. Full replacement typically needed every 8-10 years.
Automatic Climate Control Switch
Signs of Failure:
- Inconsistent temperature regulation
- System stuck on one setting
- Temperature sensor readings incorrect
- Display showing error codes
- Automatic adjustments not functioning
Service Schedule: Professional calibration recommended every 2-3 years. Sensor cleaning annually. Software updates as recommended by manufacturer.
Note: These are general guidelines. Specific maintenance schedules may vary by manufacturer and model. Always consult your owner's manual for exact specifications.
How It Works
- Get a quote online or set-up a time to have your vehicle looked at.
- Pick time slots that work for you, easily, online.
- We will confirm appointments and send reminders.
- Our mechanics bring everything that is needed to you.
- All you have to do is provided a safe area for the work to be performed.
What we need from you
- A safe place to work on your vehicle
- No working on the side of busy roads
- No working on unstable or steep surfaces.
- We do not perform repairs during severe weather.
- Authorization from a property owner or management.
- Repair work done in a parking lot or at your requires permission.
- We do not do repairs in areas restricted by law.
Common Questions
Service Area
Our primary service area is greater Grand Rapids and includes Comstock Park, East Grand Rapids, Grandville, Kentwood, Walker, and Wyoming
Our secondary service area is provided by our Belding location and includes: Belding, Greenville, Ionia and the sorrounding areas.
Contact us if you have any questions about where we provide services.
