Fuse Repair Cost Guide
Standard Fuse Replacement
Typical repair time: 15-30 minutes
Estimated cost: $31.25 - $62.50
Plus cost of fuse ($5-15)
This includes basic fuse inspection, replacement, and testing.
Fuse Box Repair/Clean-up
Typical repair time: 1-2 hours
Estimated cost: $125 - $250
Plus materials if needed
Includes cleaning corroded terminals, tightening connections, and labeling circuits.
Circuit Breaker Panel Fuse Upgrade
Typical repair time: 2-4 hours
Estimated cost: $250 - $500
Plus materials ($100-200)
Converting old fuse system to modern circuit breakers.
Emergency Fuse Service
Typical repair time: 30-60 minutes
Estimated cost: $125 - $187.50
Plus after-hours emergency fee ($75)
Available 24/7 for urgent fuse-related electrical issues.
Note: These are estimated costs based on typical scenarios. Actual costs may vary depending on the complexity of the job and any additional issues discovered during inspection.
Additional Fees May Include:
- Travel fee for locations outside service area
- Additional materials needed for repair
- Permits if required by local regulations
- Extended labor for complex installations
How to Replace Different Types of Fuses
Cartridge Fuse
Required tools:Replacement fuse, fuse puller (optional), multimeter (optional)
Steps:
- Turn off power to the circuit at the main breaker
- Locate the blown fuse in the fuse box
- Remove the old fuse by pulling it straight out (use fuse puller if available)
- Verify the amperage rating of the replacement fuse matches the original
- Insert new fuse firmly into the socket
- Restore power and test the circuit
Blade Fuse (Automotive)
Required tools:Replacement fuse, fuse puller, owner's manual
Steps:
- Locate the fuse box (usually under dashboard or hood)
- Remove fuse box cover
- Identify the blown fuse using the diagram in manual
- Extract the blown fuse using fuse puller
- Compare amperage ratings and insert new fuse
- Replace fuse box cover
- Test the affected component
Glass Tube Fuse
Required tools:Replacement fuse, screwdriver (if needed)
Steps:
- Disconnect power to the device
- Locate fuse holder and unscrew/open it
- Remove old fuse carefully
- Check specifications match on replacement fuse
- Insert new fuse into holder
- Close/screw fuse holder securely
- Restore power and test
High-Voltage Fuse
Warning:High-voltage fuse replacement should only be performed by qualified electricians.
Required tools:Protective equipment, specialized tools, replacement fuse
Steps:
- Implement proper lockout/tagout procedures
- Verify absence of voltage
- Use appropriate PPE
- Remove fuse using specialized tools
- Install new fuse of correct rating
- Document replacement
- Remove lockout/tagout and restore power
SMD Fuse (Surface Mount)
Required tools:Soldering iron, solder, replacement fuse, desoldering tools
Steps:
- Disconnect device from power
- Locate SMD fuse on circuit board
- Desolder old fuse carefully
- Clean contact points
- Solder new fuse in place
- Inspect solder joints
- Test circuit functionality
Important Safety Note:If you're unsure about replacing any type of fuse, please consult a qualified electrician. Using incorrect fuse ratings or improper installation can create fire hazards or damage equipment.
What is a Fuse and what does it do
No content available for this section.
Signs and Symptoms of Fuse Failure
Common Fuse Types and Their Maintenance Guide
Cartridge Fuses
Signs of Failure:
- Visible discoloration or darkening of the fuse window
- Broken or separated metal strip inside
- Bulging or deformed casing
- Burn marks on fuse ends
Service Schedule: Inspect annually or when equipment shows power issues. Replace immediately if signs of failure appear. No regular replacement needed if functioning properly.
Blade Fuses (Automotive)
Signs of Failure:
- Broken metal strip visible through transparent housing
- Blackened or melted plastic housing
- Related electrical component stops working
Service Schedule: Check during regular vehicle maintenance (every 15,000-30,000 miles). Replace as needed based on visual inspection.
High-Voltage Fuses
Signs of Failure:
- Triggered indicator pin or flag
- Visible damage to fuse body
- Equipment shutdown
Service Schedule: Professional inspection required annually. Replace every 5-7 years regardless of condition due to critical safety nature.
Glass Tube Fuses
Signs of Failure:
- Cloudy or darkened glass
- Visible break in the internal wire
- Metallic residue inside glass
Service Schedule: Visual inspection every 6 months. No scheduled replacement necessary unless failed.
Time-Delay Fuses
Signs of Failure:
- Spring mechanism visible damage
- Deformed or bulging body
- Equipment experiencing delayed startup issues
Service Schedule: Inspect bi-annually. Replace every 3-5 years in critical applications.
Note: All fuses should be replaced with the same type and rating as originally installed. When in doubt, consult a licensed electrician.
How It Works
- Get a quote online or set-up a time to have your vehicle looked at.
- Pick time slots that work for you, easily, online.
- We will confirm appointments and send reminders.
- Our mechanics bring everything that is needed to you.
- All you have to do is provided a safe area for the work to be performed.
What we need from you
- A safe place to work on your vehicle
- No working on the side of busy roads
- No working on unstable or steep surfaces.
- We do not perform repairs during severe weather.
- Authorization from a property owner or management.
- Repair work done in a parking lot or at your requires permission.
- We do not do repairs in areas restricted by law.
Common Questions
Service Area
Our primary service area is greater Grand Rapids and includes Comstock Park, East Grand Rapids, Grandville, Kentwood, Walker, and Wyoming
Our secondary service area is provided by our Belding location and includes: Belding, Greenville, Ionia and the sorrounding areas.
Contact us if you have any questions about where we provide services.
