Service and Cost
Typical Cost
The cost to replace or repair an evaporation vent solenoid, also known as a purge valve or EVAP vent solenoid, can vary depending on several factors, including the make and model of the vehicle, labor rates in your area, and whether you choose an original equipment manufacturer (OEM) part or an aftermarket part. Generally, the cost can be broken down into parts and labor:
1. Parts Cost: The cost of the evaporation vent solenoid itself typically ranges from $50 to $175. OEM parts tend to be on the higher end of this range, while aftermarket parts are usually more affordable.
2. Labor Cost: With our shop rate of $125 per hour, labor costs typically range from $125 to $250. The job usually takes about 1 to 2 hours, depending on the vehicle and the accessibility of the part.
3. Total Cost: Combining parts and labor, the total cost to replace an evaporation vent solenoid typically ranges from $175 to $425. However, this can vary based on your specific vehicle model and any additional repairs needed. We recommend scheduling a diagnostic appointment to receive an accurate quote for your vehicle.
Keep in mind that if there are other issues with the EVAP system, such as leaks or other faulty components, additional diagnostic time and repairs may be necessary, which would affect the final cost.
Typical Service Procedure
The Evaporation Vent Solenoid, also known as the EVAP vent solenoid or EVAP vent valve, is a component of the vehicle's evaporative emission control (EVAP) system. This system is designed to prevent fuel vapors from escaping into the atmosphere. When it comes to replacing or repairing the EVAP vent solenoid, several steps and components are typically involved:
1. Diagnosis: A proper diagnosis is essential to confirm that the EVAP vent solenoid is the faulty component. Our technicians use diagnostic scanners to check for trouble codes related to the EVAP system, such as P0446, P0449, or others.
2. Accessing the Solenoid: The EVAP vent solenoid is usually located near the fuel tank or along the EVAP canister. Accessing it may require lifting the vehicle and removing protective covers or panels.
3. Removal of the Old Solenoid: This involves disconnecting the electrical connector and any hoses attached to the solenoid. The solenoid is typically held in place by bolts or clips that need to be removed.
4. Inspection of Related Components: While replacing the solenoid, our technicians inspect related components such as hoses, connectors, and the EVAP canister for any signs of damage or wear.
5. Installation of the New Solenoid: The new solenoid is installed by reversing the removal process. This includes securing it with bolts or clips, reconnecting hoses, and attaching the electrical connector.
6. Testing: After installation, we thoroughly test the system to ensure proper operation. This includes clearing any diagnostic trouble codes and performing a drive cycle to verify the repair.
7. Additional Parts: In some cases, additional parts such as gaskets, seals, or hoses may need to be replaced if they are found to be damaged during the inspection.
8. Labor Costs: The cost of labor varies depending on your vehicle's make and model, as well as the complexity of accessing the solenoid.
9. Warranty: We provide warranty coverage on both parts and labor for your peace of mind.
Overall, replacing or repairing the EVAP vent solenoid requires professional diagnostic work, mechanical skill, and attention to detail to ensure the EVAP system functions correctly and emissions are kept in check.
What is a Evaporation Vent Solendoid and What Does It Do?
The Evaporation Vent Solenoid, often referred to as the EVAP vent solenoid or EVAP vent valve, is a component of a vehicle's Evaporative Emission Control (EVAP) system. The primary function of the EVAP system is to prevent the release of harmful fuel vapors from the fuel tank into the atmosphere. Instead, these vapors are captured and stored in a charcoal canister and later routed to the engine to be burned during combustion.The EVAP vent solenoid plays a crucial role in this system by controlling the flow of air into and out of the charcoal canister. Here’s how it works:
1. Sealing the System: When the vehicle is off, the EVAP vent solenoid closes to seal the system, preventing fuel vapors from escaping into the atmosphere.
2. Purging Vapors: When the engine is running and conditions are appropriate, the vehicle's computer (ECU) opens the EVAP vent solenoid to allow fresh air to enter the system. This helps push the stored fuel vapors from the charcoal canister into the engine to be burned.
3. System Testing: The EVAP vent solenoid is also involved in self-diagnostic tests of the EVAP system. By opening and closing the solenoid, the ECU can check for leaks or other issues within the system.A malfunctioning EVAP vent solenoid can lead to issues such as the Check Engine Light turning on, failed emissions tests, or a noticeable fuel odor. Common problems include the solenoid getting stuck open or closed, which can be caused by electrical issues, debris, or wear and tear over time.
Signs of a bad Evaporation Vent Solendoid
The Evaporation Vent Solenoid, also known as the EVAP vent solenoid or EVAP vent valve, is a crucial component of a vehicle's Evaporative Emission Control (EVAP) system. This system is designed to prevent fuel vapors from escaping into the atmosphere. When the EVAP vent solenoid fails, it can lead to several noticeable symptoms:
1. Check Engine Light: One of the most common signs of a failing EVAP vent solenoid is the illumination of the Check Engine Light on the dashboard. The vehicle's onboard diagnostic system will detect a problem with the EVAP system and trigger the light. A diagnostic scan tool can be used to retrieve trouble codes related to the EVAP system, such as P0446, P0449, or P0455, which can indicate issues with the vent solenoid.
2. Fuel Odor: A faulty EVAP vent solenoid can cause fuel vapors to escape from the EVAP system, leading to a noticeable fuel smell around the vehicle, especially near the fuel tank or engine compartment.
3. Difficulty Refueling: If the EVAP vent solenoid is stuck closed, it can create a vacuum in the fuel tank, making it difficult to refuel the vehicle. You might experience slow refueling or the fuel pump nozzle shutting off frequently.
4. Poor Engine Performance: In some cases, a malfunctioning EVAP vent solenoid can affect engine performance. This might manifest as rough idling, stalling, or hesitation during acceleration due to improper fuel vapor management.
5. Increased Emissions: A failing EVAP vent solenoid can lead to increased emissions, as the system is unable to properly contain and process fuel vapors. This can result in the vehicle failing an emissions test.
6. Hissing Noise: You might hear a hissing noise coming from the fuel tank area, which can indicate a vacuum leak caused by a malfunctioning vent solenoid.If you suspect that the EVAP vent solenoid is failing, it's important to have it diagnosed and repaired by a qualified mechanic. Ignoring the issue can lead to increased emissions, reduced fuel efficiency, and potential damage to other components of the EVAP system.
How It Works
- Get a quote online or set-up a time to have your vehicle looked at.
- Pick time slots that work for you, easily, online.
- We will confirm appointments and send reminders.
- Our mechanics bring everything that is needed to you.
- All you have to do is provided a safe area for the work to be performed.
What we need from you
- A safe place to work on your vehicle
- No working on the side of busy roads
- No working on unstable or steep surfaces.
- We do not perform repairs during severe weather.
- Authorization from a property owner or management.
- Repair work done in a parking lot or at your requires permission.
- We do not do repairs in areas restricted by law.
Common Questions
Service Area
Our primary service area is greater Grand Rapids and includes Comstock Park, East Grand Rapids, Grandville, Kentwood, Walker, and Wyoming
Our secondary service area is provided by our Belding location and includes: Belding, Greenville, Ionia and the sorrounding areas.
Contact us if you have any questions about where we provide services.
