Camshaft Tower Gasket Repair Costs
Basic Camshaft Tower Gasket Replacement
Typical labor time: 2-3 hours
Labor cost: $250-$375
Parts cost: $30-$75
Total estimated cost: $280-$450
Complex Camshaft Tower Gasket Replacement
(Vehicles requiring additional component removal)
Typical labor time: 4-6 hours
Labor cost: $500-$750
Parts cost: $30-$75
Total estimated cost: $530-$825
Premium/Luxury Vehicle Camshaft Tower Gasket Replacement
Typical labor time: 5-8 hours
Labor cost: $625-$1,000
Parts cost: $75-$200
Total estimated cost: $700-$1,200
*Note: Prices are estimates based on our standard rate of $125/hour. Actual costs may vary depending on vehicle make, model, and year. Additional repairs may be necessary depending on inspection findings.
What's Included:
- Complete diagnostic inspection
- Removal and replacement of camshaft tower gasket
- Cleaning of mating surfaces
- Testing for proper seal
- Quality assurance check
Camshaft Tower Gasket Replacement Procedure
Here's a general step-by-step guide for replacing camshaft tower gaskets:
1. Preparation- Allow engine to cool completely
- Disconnect negative battery terminal
- Remove engine cover and related components for access
- Remove valve cover
- Remove timing cover (if necessary)
- Document and mark positions of timing components
- Remove camshaft tower bolts in correct sequence (typically outside-in)
- Clean all mating surfaces thoroughly
- Inspect camshaft towers for damage or warping
- Check camshaft journals for wear
- Verify camshaft end play is within specifications
- Install new gaskets (do not reuse old gaskets)
- Apply appropriate sealant if specified by manufacturer
- Reinstall camshaft towers in correct position
- Torque bolts to specification in proper sequence (typically inside-out)
- Verify timing marks are aligned
- Reinstall timing cover and valve cover
- Reconnect battery
- Start engine and check for leaks
Important Note:This is a complex repair that requires specific tools and expertise. Proper timing and torque specifications are critical. If unsure, please consult a professional mechanic.
Typical repair time: 4-8 hours depending on vehicle make and model
Common Tools Required:
- Torque wrench
- Socket set
- Gasket scraper
- Timing tools (vehicle specific)
- Clean rags
- Degreaser
Understanding Camshaft Tower Gaskets
No content available for this section.
Common Failure Symptoms of Camshaft Tower Gasket
Camshaft Tower Gasket: Signs of Failure & Maintenance Guide
Common Signs of Failure:
External Oil Leaks:
- Oil spots under the vehicle, particularly near the engine area
- Visible oil seepage around the camshaft tower or valve cover area
- Oil residue on the engine block
Engine Performance Issues:
- Decreased engine performance due to loss of oil pressure
- Burning oil smell, especially when the engine is hot
- Blue smoke from exhaust in severe cases
Typical Service Schedule:
Preventive Maintenance:
- Inspection recommended every 60,000 miles
- Replacement typically needed between 80,000-100,000 miles
- Earlier replacement may be needed in high-performance or high-stress applications
Factors Affecting Service Life:
- Engine operating temperature
- Oil change frequency
- Driving conditions
- Climate and environmental factors
Note: These are general guidelines. Specific service intervals may vary by vehicle make, model, and manufacturer recommendations. Always consult your vehicle's owner's manual for exact maintenance schedules.
How It Works
- Get a quote online or set-up a time to have your vehicle looked at.
- Pick time slots that work for you, easily, online.
- We will confirm appointments and send reminders.
- Our mechanics bring everything that is needed to you.
- All you have to do is provided a safe area for the work to be performed.
What we need from you
- A safe place to work on your vehicle
- No working on the side of busy roads
- No working on unstable or steep surfaces.
- We do not perform repairs during severe weather.
- Authorization from a property owner or management.
- Repair work done in a parking lot or at your requires permission.
- We do not do repairs in areas restricted by law.
Common Questions
Service Area
Our primary service area is greater Grand Rapids and includes Comstock Park, East Grand Rapids, Grandville, Kentwood, Walker, and Wyoming
Our secondary service area is provided by our Belding location and includes: Belding, Greenville, Ionia and the sorrounding areas.
Contact us if you have any questions about where we provide services.
