Exhaust Support Repair Cost Guide
Labor rates based on $125/hour. Parts costs may vary based on vehicle make and model.
Rubber Hangers/IsolatorsTypical repair time: 0.5-1 hour
Labor cost: $62.50-$125
Parts cost: $10-30 per hanger
Total estimated cost: $72.50-$155
Typical repair time: 1-2 hours
Labor cost: $125-$250
Parts cost: $30-100
Total estimated cost: $155-$350
Typical repair time: 1-1.5 hours
Labor cost: $125-$187.50
Parts cost: $50-150
Total estimated cost: $175-$337.50
Typical repair time: 2-3 hours
Labor cost: $250-$375
Parts cost: $100-300
Total estimated cost: $350-$675
Note: These are estimated costs. Actual pricing may vary depending on vehicle make/model, parts availability, and extent of damage. Additional repairs may be needed if rust or corrosion is present.
Exhaust Support Repair Guide
Rubber Hangers/Isolators
Repair Steps:
- Safely lift and support vehicle if needed
- Spray penetrating oil on old rubber hanger
- Remove old rubber hanger by pulling/twisting it off metal hooks
- Clean mounting points of any rust or debris
- Install new rubber hanger by pushing it onto exhaust pipe hook and frame mount
- Verify proper alignment and that exhaust isn't touching vehicle body
Average repair time: 15-30 minutes per hanger
Metal Brackets
Repair Steps:
- Support exhaust system with jack stand
- Remove rusted/damaged bracket bolts
- Clean mounting surfaces
- Position new bracket
- Install new mounting hardware with thread locker
- Torque bolts to manufacturer specifications
- Check alignment and clearance
Average repair time: 30-45 minutes per bracket
Welded Hangers
Repair Steps:
- Support exhaust system securely
- Cut off old broken hanger
- Clean area of rust and debris
- Position new hanger rod
- Weld new hanger to exhaust pipe
- Allow to cool completely
- Paint welded area with high-temp paint
- Install rubber isolator
- Verify proper alignment
Average repair time: 45-60 minutes per hanger
Heat Shields
Repair Steps:
- Remove damaged heat shield mounting hardware
- Clean mounting surfaces
- Position new heat shield
- Install new mounting clips/bolts
- Verify shield isn't contacting exhaust pipe
- Check for proper clearance to vehicle components
Average repair time: 20-30 minutes per shield
Note:Repair times may vary based on vehicle make/model and rust conditions. Professional installation recommended for welded repairs.
Understanding Exhaust Supports
No content available for this section.
Common Failure Symptoms of Exhaust Support Systems
Common Exhaust Support Issues & Maintenance Guide
Rubber Hangers
Signs of Failure:
- Cracking or visible deterioration of rubber
- Stretched or deformed rubber components
- Exhaust system hanging lower than normal
- Increased exhaust noise or vibration
Service Schedule: Inspect every 30,000 miles or when unusual exhaust movement is noticed. Replace typically every 60,000-80,000 miles depending on climate conditions.
Metal Brackets
Signs of Failure:
- Visible rust or corrosion
- Broken welds
- Bent or damaged mounting points
- Loose or missing hardware
Service Schedule: Inspect annually or during routine exhaust system maintenance. Replace as needed when corrosion becomes severe.
Heat Shields
Signs of Failure:
- Rattling noises from underneath vehicle
- Visible damage or warping
- Missing mounting clips
- Rust perforation
Service Schedule: Inspect during regular oil changes. No specific replacement interval - replace when damaged or severely corroded.
Support Clamps
Signs of Failure:
- Loose exhaust connections
- Excessive rust or corrosion
- Broken or missing bolts
- Exhaust leaks at connection points
Service Schedule: Check tightness every 15,000 miles. Replace clamps when rust becomes severe or if unable to achieve proper tightness.
Note: Service intervals may vary based on driving conditions, climate, and vehicle manufacturer recommendations. Always consult your vehicle's manual for specific maintenance schedules.
How It Works
- Get a quote online or set-up a time to have your vehicle looked at.
- Pick time slots that work for you, easily, online.
- We will confirm appointments and send reminders.
- Our mechanics bring everything that is needed to you.
- All you have to do is provided a safe area for the work to be performed.
What we need from you
- A safe place to work on your vehicle
- No working on the side of busy roads
- No working on unstable or steep surfaces.
- We do not perform repairs during severe weather.
- Authorization from a property owner or management.
- Repair work done in a parking lot or at your requires permission.
- We do not do repairs in areas restricted by law.
Common Questions
Service Area
Our primary service area is greater Grand Rapids and includes Comstock Park, East Grand Rapids, Grandville, Kentwood, Walker, and Wyoming
Our secondary service area is provided by our Belding location and includes: Belding, Greenville, Ionia and the sorrounding areas.
Contact us if you have any questions about where we provide services.
