Fog/Driving Light Bulb Replacement Cost Guide
Labor rates are calculated at$125 per hour. Costs below include both parts and labor but may vary based on vehicle make and model.
Halogen Fog Light Bulb
Typical Cost:$75-150
- Parts: $15-40 per bulb
- Labor: 0.5-1.0 hours ($62.50-125)
Most common and straightforward replacement. Usually accessible through the engine bay or wheel well.
LED Fog Light Assembly
Typical Cost:$200-400
- Parts: $100-250 per assembly
- Labor: 0.8-1.2 hours ($100-150)
Often requires bumper removal or partial disassembly. LED units typically come as complete assemblies.
HID (Xenon) Fog Light Bulb
Typical Cost:$150-300
- Parts: $75-150 per bulb
- Labor: 0.6-1.2 hours ($75-150)
More complex due to high-voltage ballast system. May require additional testing of electrical components.
*Prices are estimates and may vary based on vehicle make, model, and year. Additional costs may apply if there is damage to wiring or mounting hardware.
Fog/Driving Light Bulb Replacement Guide
H3 Bulbs
Typical repair steps:
- Locate the fog light housing under the front bumper
- Access the back of the housing - may require removing wheel well liner or accessing from underneath
- Locate and disconnect the wiring harness from the bulb
- Turn the bulb holder counterclockwise to release it
- Remove old H3 bulb and avoid touching new bulb's glass with bare hands
- Insert new H3 bulb into holder, ensuring proper alignment
- Reconnect wiring harness
- Test lights before reassembling any removed components
H8 Bulbs
Typical repair steps:
- Access fog light assembly (may require partial bumper removal)
- Remove dust cover if present
- Disconnect electrical connector
- Release retaining clip or turn bulb counterclockwise
- Remove old H8 bulb
- Install new bulb using gloves to prevent oil contamination
- Secure bulb and reconnect wiring
- Replace dust cover and test operation
H11 Bulbs
Typical repair steps:
- Locate fog light housing
- Access bulb from engine bay or wheel well
- Remove protective cover if present
- Disconnect wiring connector
- Turn bulb base counterclockwise to remove
- Insert new H11 bulb without touching glass surface
- Secure bulb and reconnect wiring
- Test functionality before completing reassembly
LED Fog Lights
Typical repair steps:
- Access fog light assembly
- Disconnect battery to prevent electrical shorts
- Remove entire LED housing unit
- Disconnect wiring harness
- Install new LED assembly
- Reconnect wiring ensuring proper polarity
- Secure housing in place
- Reconnect battery and test operation
Important Notes:
- Always consult your vehicle's manual for specific instructions
- Wear gloves when handling halogen bulbs
- Ensure proper bulb wattage and type for your vehicle
- Check local regulations regarding fog light specifications
- Consider professional installation if uncertain about procedure
Note: Some vehicles may require special tools or additional steps depending on make and model. Professional installation is recommended if you're unsure about any step in the process.
Understanding Fog and Driving Light Bulbs
No content available for this section.
Common Failure Symptoms of Fog/Driving Light Bulbs
Common Signs of Fog/Driving Light Bulb Failure and Maintenance Guide
Halogen Fog Light Bulbs
Signs of Failure:
- Dimming or yellowing light output
- Flickering when vehicle is running
- Complete bulb burnout
- Visible dark spots or discoloration on the bulb
Service Schedule: Replace every 500-1000 hours of use or when showing signs of dimming. Typically needs replacement every 2-3 years with normal use.
LED Fog Light Bulbs
Signs of Failure:
- Partial LED failure (some LEDs stop working)
- Inconsistent brightness
- Color shifting from white to blue or yellow
- Complete failure of LED array
Service Schedule: LED fog lights typically last 20,000-50,000 hours. Most don't require scheduled replacement unless failing. Can last the vehicle's lifetime with proper installation.
HID Fog Light Bulbs
Signs of Failure:
- Pink or purple color shift
- Delayed start-up
- Frequent flickering
- Different color output between bulbs
Service Schedule: Replace every 2,000-3,000 hours of use. Typically needs replacement every 3-5 years depending on usage.
Important Maintenance Tip: Regardless of bulb type, always replace fog lights in pairs to ensure consistent lighting output and color matching.
How It Works
- Get a quote online or set-up a time to have your vehicle looked at.
- Pick time slots that work for you, easily, online.
- We will confirm appointments and send reminders.
- Our mechanics bring everything that is needed to you.
- All you have to do is provided a safe area for the work to be performed.
What we need from you
- A safe place to work on your vehicle
- No working on the side of busy roads
- No working on unstable or steep surfaces.
- We do not perform repairs during severe weather.
- Authorization from a property owner or management.
- Repair work done in a parking lot or at your requires permission.
- We do not do repairs in areas restricted by law.
Common Questions
Service Area
Our primary service area is greater Grand Rapids and includes Comstock Park, East Grand Rapids, Grandville, Kentwood, Walker, and Wyoming
Our secondary service area is provided by our Belding location and includes: Belding, Greenville, Ionia and the sorrounding areas.
Contact us if you have any questions about where we provide services.
