Professional Fog Light Lens Repair

Don't Let Damaged Fog Lights Compromise Your Safety

Drive with confidence knowing your fog lights are performing at their best. Our certified mechanics specialize in professional fog light lens repair forall makes and models.

Expert repairs by certified technicians
Industry-leading 24-month/24,000-mile warranty
Same-day service available
Competitive pricing

Fog Light Lens Repair Cost Guide

Basic Fog Light Lens Cleaning
Service time: 30 minutes
Labor cost: $62.50
Additional materials: $10-15
Total estimated cost: $72.50-77.50

Minor Fog Light Lens Restoration
Service time: 1 hour
Labor cost: $125
Additional materials: $25-35
Total estimated cost: $150-160

Major Fog Light Lens Restoration
Service time: 1.5-2 hours
Labor cost: $187.50-250
Additional materials: $40-50
Total estimated cost: $227.50-300

Fog Light Lens Replacement
Service time: 1-1.5 hours
Labor cost: $125-187.50
Parts cost: Varies by vehicle ($50-200)
Total estimated cost: $175-387.50

*Please note: These are estimated costs. Final pricing may vary based on vehicle make/model and extent of damage. All services include thorough inspection and testing.

Fog Light Lens Repair Procedures

Cracked or Broken Fog Light Lens

Repair Steps:

  1. Remove the fog light assembly from the vehicle
  2. Carefully separate the damaged lens from the housing
  3. Clean all old sealant and debris from the housing
  4. Install new lens with appropriate weatherproof sealant
  5. Allow sealant to cure completely
  6. Test for proper fitment and water resistance
  7. Reinstall fog light assembly

Yellowed or Oxidized Fog Light Lens

Repair Steps:

  1. Clean lens thoroughly with soap and water
  2. Sand lens with progressive grits (1000, 2000, 3000)
  3. Apply UV-resistant lens restoration compound
  4. Polish with buffing wheel or pad
  5. Apply UV protective coating
  6. Allow coating to cure

Scratched Fog Light Lens

Repair Steps:

  1. Clean lens surface thoroughly
  2. Assess scratch depth
  3. For light scratches:
    • Apply polishing compound
    • Buff with microfiber cloth
  4. For deep scratches:
    • Wet sand affected area
    • Apply polishing compound
    • Buff to restore clarity
    • Apply protective coating

Condensation Inside Fog Light Lens

Repair Steps:

  1. Remove fog light assembly
  2. Locate and seal any visible cracks
  3. Create/clear drainage holes if necessary
  4. Dry interior thoroughly
  5. Replace damaged seals
  6. Apply silica gel packets if appropriate
  7. Reassemble and test

Important Notes:

  • Always wear appropriate safety equipment including eye protection
  • Consult vehicle manual for specific removal/installation procedures
  • Consider professional help for complex repairs
  • Some repairs may require complete lens replacement

Repair times typically range from 1-3 hours depending on damage severity and repair method.

Understanding Fog Light Lenses

fog-light-lens.webp

No content available for this section.

Common Failure Symptoms of Fog Light Lenses: Signs of Deterioration and Damage

Signs of Fog Light Lens Failure and Maintenance Guide

Common Signs of Fog Light Lens Failure:

Yellowing or Discoloration
Over time, UV exposure can cause the plastic lens to yellow or become cloudy, reducing light output and affecting appearance. This typically occurs after 3-5 years of regular exposure.

Cracks or Chips
Impact from road debris can cause physical damage to the lens. Even small cracks can allow moisture to enter, leading to internal fogging and electrical issues.

Moisture Inside Lens
If you notice condensation or water droplets inside the fog light housing, this indicates the seal has failed and needs immediate attention to prevent electrical damage.

Haziness or Oxidation
A cloudy or hazy appearance on the surface indicates oxidation of the plastic lens, which significantly reduces light output and visibility.

Typical Service Schedule:

Regular Inspection
• Check fog light lenses every 6 months for signs of damage or deterioration
• Clean lenses during regular car washing to prevent dirt buildup

Preventative Maintenance
• Apply UV-protective coating every 12-18 months
• Polish lenses every 2 years to remove minor oxidation
• Replace protective covers (if equipped) when showing wear

Replacement Guidelines
• Most fog light lenses should be replaced every 5-7 years, depending on climate and usage
• Immediate replacement is recommended if cracks or severe yellowing is present
• Consider upgrading to higher-quality materials when replacing for longer service life

Note: Service intervals may vary based on driving conditions, climate, and vehicle storage conditions. Consult your vehicle's manual for specific recommendations.

How It Works

  • Get a quote online or set-up a time to have your vehicle looked at.
  • Pick time slots that work for you, easily, online.
  • We will confirm appointments and send reminders.
  • Our mechanics bring everything that is needed to you.
  • All you have to do is provided a safe area for the work to be performed.

What we need from you

  • A safe place to work on your vehicle
  • No working on the side of busy roads
  • No working on unstable or steep surfaces.
  • We do not perform repairs during severe weather.
  • Authorization from a property owner or management.
  • Repair work done in a parking lot or at your  requires permission.
  • We do not do repairs in areas restricted by law.

Common Questions

Service Area

Our primary service area is greater Grand Rapids and includes Comstock Park, East Grand Rapids, GrandvilleKentwood, Walker, and Wyoming

Our secondary service area is provided by our Belding location and includes: Belding, Greenville, Ionia and the sorrounding areas.

Contact us if you have any questions about where we provide services.

What our customers say: