Reverse Light Repair & Replacement

Don't Let a Faulty Reverse Light Put You at Risk

A malfunctioning reverse light isn't just an inconvenience—it's a safety hazard. Ourcertified mechanicsare ready to diagnose and repair your reverse light issues today.

24-month/24,000-mile warrantyon all repairs

ASE-certified technicians

All makes and models serviced

Same-day service available

Schedule Your Reverse Light Repair Now

Reverse Light Bulb Replacement Cost Guide

Basic Bulb Replacement (Easily Accessible)
Labor Time: 15-30 minutes
Labor Cost: $31.25 - $62.50
Parts Cost: $5 - $15
Total Estimated Cost: $36.25 - $77.50

Bumper Removal Required
Labor Time: 1-1.5 hours
Labor Cost: $125 - $187.50
Parts Cost: $5 - $15
Total Estimated Cost: $130 - $202.50

Interior Panel Removal Required
Labor Time: 1-2 hours
Labor Cost: $125 - $250
Parts Cost: $5 - $15
Total Estimated Cost: $130 - $265

LED Assembly Replacement
Labor Time: 1-2 hours
Labor Cost: $125 - $250
Parts Cost: $50 - $200
Total Estimated Cost: $175 - $450

*Note: Prices are estimates based on our standard rate of $125/hour. Actual costs may vary depending on vehicle make, model, and year. Additional parts or repairs may be required in some cases.

Schedule Your Reverse Light Repair Now

Reverse Light Bulb Repair Procedures

Standard Incandescent Reverse Light Bulb

Tools needed:Work gloves, replacement bulb

Repair steps:

  1. Locate the reverse light housing at the rear of the vehicle
  2. Remove the light assembly cover (may require screwdriver)
  3. Identify the reverse light bulb socket
  4. Twist the bulb socket counterclockwise to remove it
  5. Pull out the old bulb
  6. Insert new bulb without touching the glass with bare hands
  7. Reinsert socket and twist clockwise until secure
  8. Replace cover and test functionality

LED Reverse Light Module

Tools needed:Socket set, screwdrivers, replacement LED module

Repair steps:

  1. Access the reverse light assembly from behind the tail light
  2. Disconnect the vehicle's battery
  3. Remove the entire tail light assembly if required
  4. Disconnect the electrical connector from the LED module
  5. Remove mounting screws/clips securing the LED module
  6. Install new LED module
  7. Reconnect electrical connector
  8. Reinstall tail light assembly if removed
  9. Reconnect battery and test

Integrated LED Tail Light Assembly

Tools needed:Socket set, trim removal tools, replacement tail light assembly

Repair steps:

  1. Disconnect vehicle battery
  2. Remove any interior trim panels to access mounting bolts
  3. Disconnect electrical connectors
  4. Remove mounting bolts/nuts securing the assembly
  5. Remove entire tail light assembly
  6. Install new tail light assembly
  7. Secure mounting bolts/nuts
  8. Reconnect electrical connectors
  9. Replace interior trim
  10. Reconnect battery and verify operation

Note:These are general procedures and may vary by vehicle make and model. Always consult your vehicle's service manual for specific instructions.

For complex repairs or if you're unsure about any step, we recommend seeking professional assistance to ensure proper installation and function of your reverse lights.

Understanding Reverse Light Bulbs

reverse-light-bulb.webp

No content available for this section.

Common Failure Symptoms of Reverse Light Bulbs: Warning Signs and Indicators

Common Reverse Light Bulb Issues and Maintenance Guide

LED Reverse Lights

Signs of Failure:

  • Flickering or intermittent operation
  • Partial illumination (some LEDs in cluster not lighting)
  • Complete failure to illuminate
  • Dimmer than usual output

Service Schedule:

LED reverse lights typically last 20,000-50,000 hours and usually don't require scheduled maintenance. Replace only upon failure.

Halogen Reverse Lights

Signs of Failure:

  • Bulb appears dark or blackened
  • Filament appears broken
  • Inconsistent brightness
  • Sudden complete failure

Service Schedule:

Replace every 18-24 months or around 1,000 hours of use. Consider preventive replacement during routine maintenance.

Incandescent Reverse Lights

Signs of Failure:

  • Bulb appears cloudy
  • Broken or disconnected filament
  • Weak or yellow light output
  • Complete burnout

Service Schedule:

Replace every 12-18 months or approximately 800 hours of use. More frequent replacement may be needed in areas with rough roads or frequent use.

Note: Always check your vehicle's manual for specific maintenance schedules and approved replacement bulb types.

How It Works

  • Get a quote online or set-up a time to have your vehicle looked at.
  • Pick time slots that work for you, easily, online.
  • We will confirm appointments and send reminders.
  • Our mechanics bring everything that is needed to you.
  • All you have to do is provided a safe area for the work to be performed.

What we need from you

  • A safe place to work on your vehicle
  • No working on the side of busy roads
  • No working on unstable or steep surfaces.
  • We do not perform repairs during severe weather.
  • Authorization from a property owner or management.
  • Repair work done in a parking lot or at your  requires permission.
  • We do not do repairs in areas restricted by law.

Common Questions

Service Area

Our primary service area is greater Grand Rapids and includes Comstock Park, East Grand Rapids, Grandville,  Kentwood, Walker, and Wyoming

Our secondary service area is provided by our Belding location and includes: Belding, Greenville, Ionia and the sorrounding areas.

Contact us if you have any questions about where we provide services.

What our customers say: