Service and Cost
Typical Cost
1. Labor Costs
- Time Estimate: Replacing an oil filter housing gasket generally takes 2-5 hours, depending on the vehicle's design and accessibility.
- Labor Charge:
- Minimum: 2 hours × $125/hour = $250
- Maximum: 5 hours × $125/hour = $625
2. Parts Costs
- Oil Filter Housing Gasket:
- Cost depends on the vehicle and quality of the part. Typical range: $20 to $50.
- Optional Parts:
- In some cases, replacing additional seals or the entire oil filter housing may be recommended. Costs for these parts range from $50 to $300.
3. Additional Fees
- Fluids:
- Oil may need to be drained and replaced. New oil costs typically range from $30 to $100, depending on the type and quantity required.
- Replacement of the oil filter (if needed): $10 to $25.
- Disposal Fees:
- Proper disposal of old oil and parts: $10 to $25.
Estimated Total Cost
| Category | Low Estimate | High Estimate |
|---|---|---|
| Labor | $250 | $625 |
| Parts | $20 | $300 |
| Fluids & Materials | $40 | $125 |
| Disposal Fees | $10 | $25 |
| Total | $320 | $1,075 |
Notes for Customers
- Costs vary based on vehicle design and condition.
- We use high-quality parts that meet or exceed OEM standards for durability and reliability.
- Our technicians will provide an accurate estimate after a thorough inspection of your vehicle.
Our team is dedicated to getting your vehicle back on the road with a repair you can trust. Let us know if you’d like to schedule an appointment or have any questions!
Typical Service Procedure
When dealing with the replacement or repair of an oil filter housing, several components and steps are typically involved. The oil filter housing is a crucial part of the engine's lubrication system, and its proper functioning is essential for maintaining engine health. Here's what is typically included in the process:
1. Diagnosis: Our technicians perform a thorough diagnosis to confirm that the oil filter housing is the source of the problem. Common issues include leaks, cracks, or a faulty gasket.
2. Removal of Old Housing: Drain Oil:The engine oil is drained to prevent spills and to facilitate the removal of the oil filter housing. Remove Components:Depending on your vehicle, other components such as the intake manifold, belts, or hoses may need to be removed to access the oil filter housing. Disconnect Sensors and Lines:Any sensors or oil lines connected to the housing are carefully disconnected.
3. Inspection: Once removed, our technicians inspect the old housing and related components for damage. This includes checking for cracks, warping, or other signs of wear.
4. Replacement Parts: New Oil Filter Housing:A new housing is installed if the old one is damaged beyond repair. Gaskets and Seals:New gaskets and seals are included to ensure a proper seal and prevent leaks. Oil Filter:A new oil filter is installed as part of the process.
5. Installation: Our skilled technicians install the new or repaired housing, ensuring all connections are secure and properly aligned. Sensors and oil lines are reconnected. Any components removed for access are reinstalled.
6. Refill and Test: Refill Oil:The engine is refilled with the appropriate type and amount of oil. Check for Leaks:The engine is started, and the area around the oil filter housing is checked for leaks. Test Drive:We conduct a test drive to ensure everything is functioning correctly.
7. Final Inspection: After the test drive, we perform a final inspection to ensure there are no leaks and that the oil pressure is within the normal range.
This process ensures that your oil filter housing is properly replaced or repaired, maintaining the integrity of your engine's lubrication system. We use only quality parts and follow manufacturer specifications for optimal results.
What is a Oil Filter Housing Gasket and What Does It Do?
The oil filter housing is a crucial component in a vehicle's engine lubrication system. It serves as the mounting point for the oil filter and is typically made of metal or high-strength plastic. The primary functions of the oil filter housing include:
1. Securing the Oil Filter: The housing provides a stable and secure location for the oil filter, ensuring it remains in place and functions correctly as the engine operates.
2. Oil Flow Management: It directs the flow of engine oil through the filter. As oil circulates through the engine, it passes through the filter housed within the oil filter housing, where contaminants and debris are removed.
3. Sealing: The housing often includes seals or gaskets to prevent oil leaks. These seals ensure that oil flows through the filter and not around it, maintaining the efficiency of the filtration process.
4. Integration with Engine Components: In some vehicles, the oil filter housing may also integrate other components, such as oil coolers or sensors, which help monitor oil pressure and temperature.
5. Ease of Maintenance: The design of the oil filter housing can affect how easy it is to replace the oil filter during routine maintenance. Some housings are designed for easy access, while others may require more effort to reach.Overall, the oil filter housing is essential for maintaining clean engine oil, which is vital for reducing wear and tear on engine components and ensuring the engine runs smoothly and efficiently.
Signs of a bad Oil Filter Housing Gasket
The oil filter housing is a critical component in a vehicle's engine, as it secures the oil filter and helps channel oil through the filter to remove contaminants. When the oil filter housing begins to fail, it can lead to several issues. Here are some common signs of failure for the oil filter housing:
1. Oil Leaks: One of the most noticeable signs of a failing oil filter housing is oil leaks. You might see oil spots under your vehicle or notice oil dripping from the engine area. This can occur if the housing is cracked or if the gasket that seals the housing to the engine block is damaged or worn out.
2. Low Oil Pressure: A failing oil filter housing can lead to a drop in oil pressure. This might be indicated by a warning light on your dashboard. Low oil pressure can cause inadequate lubrication of engine components, leading to increased wear and potential engine damage.
3. Oil Contamination: If the oil filter housing is not functioning properly, it may not effectively filter contaminants from the oil. This can lead to dirty oil circulating through the engine, which can cause increased wear and tear on engine components.
4. Engine Overheating: Oil plays a crucial role in cooling the engine. If the oil filter housing is leaking or not allowing proper oil flow, it can lead to insufficient oil circulation, causing the engine to overheat.
5. Unusual Engine Noises: A lack of proper lubrication due to oil filter housing issues can result in unusual engine noises, such as knocking or ticking sounds. These noises are often a result of increased friction between engine components.
6. Check Engine Light: In some cases, a failing oil filter housing can trigger the check engine light. This can happen if the engine control unit (ECU) detects issues related to oil pressure or flow.
7. Visible Damage: Upon inspection, you might notice visible damage to the oil filter housing, such as cracks or warping. This can be caused by physical impact, excessive heat, or manufacturing defects.If you suspect that your oil filter housing is failing, it's important to address the issue promptly. Continuing to drive with a faulty oil filter housing can lead to more severe engine problems and costly repairs. It's advisable to consult with a professional mechanic to diagnose and fix the issue.
How It Works
- Get a quote online or set-up a time to have your vehicle looked at.
- Pick time slots that work for you, easily, online.
- We will confirm appointments and send reminders.
- Our mechanics bring everything that is needed to you.
- All you have to do is provided a safe area for the work to be performed.
What we need from you
- A safe place to work on your vehicle
- No working on the side of busy roads
- No working on unstable or steep surfaces.
- We do not perform repairs during severe weather.
- Authorization from a property owner or management.
- Repair work done in a parking lot or at your requires permission.
- We do not do repairs in areas restricted by law.
Common Questions
Service Area
Our primary service area is greater Grand Rapids and includes Comstock Park, East Grand Rapids, Grandville, Kentwood, Walker, and Wyoming
Our secondary service area is provided by our Belding location and includes: Belding, Greenville, Ionia and the sorrounding areas.
Contact us if you have any questions about where we provide services.
