Service and Cost
Typical Cost
1. Labor Costs
- Time Estimate: Oil pan gasket replacement typically takes 3-6 hours, depending on the vehicle's make, model, and accessibility.
- Labor Charge:
- Minimum: 3 hours × $125/hour = $375
- Maximum: 6 hours × $125/hour = $750
2. Parts Costs
- Oil Pan Gasket:
- The cost varies based on the vehicle and gasket quality. Typical range: $25 to $100.
- Optional Parts:
- Some vehicles may require a new oil pan or hardware (bolts, seals) if damaged or corroded, ranging from $50 to $300.
3. Additional Fees
- Fluids:
- Engine oil will need to be fully drained and replaced. The cost for oil and a new oil filter typically ranges from $50 to $150.
- Disposal Fees:
- Proper disposal of old oil and materials: $10 to $25.
Estimated Total Cost
Category | Low Estimate | High Estimate |
---|---|---|
Labor | $375 | $750 |
Parts | $25 | $300 |
Fluids & Materials | $50 | $150 |
Disposal Fees | $10 | $25 |
Total | $460 | $1,225 |
Notes for Customers
- Costs may vary based on your vehicle’s design and condition.
- We use high-quality parts designed to meet or exceed OEM standards for long-term reliability.
- Our certified technicians ensure a thorough repair process, including proper cleaning and sealing for leak prevention.
We’re committed to keeping your vehicle running smoothly and will provide a detailed estimate before starting the repair. Let us know if you’d like to schedule an appointment or have any questions!
Typical Service Procedure
When replacing or repairing the oil pan gasket, several steps and components are typically involved to ensure a proper seal and prevent oil leaks. Here's what is generally included in the process:
1. Preparation and Safety: Our technicians lift your vehicle using a jack and secure it on jack stands to provide access to the oil pan. The battery is disconnected to ensure safety during the repair.
2. Draining the Oil We drain the engine oil by removing the oil drain plug. This is necessary to prevent spills and to allow for the removal of the oil pan.
3. Removing Components Depending on your vehicle, other components such as the exhaust system, cross members, or other obstructions may need to be removed to access the oil pan. The oil pan is then unbolted and carefully removed from the engine.
4. Cleaning Our technicians thoroughly clean the old gasket material from the oil pan and the engine block mating surfaces. This is crucial to ensure a good seal with the new gasket. The oil pan itself is cleaned to remove any sludge or debris.
5. Inspecting and Replacing the Gasket We remove and inspect the old gasket for signs of wear or damage. A new oil pan gasket is installed. Depending on your vehicle, this could be a rubber, cork, or silicone gasket.
6. Reinstallation The oil pan is reinstalled with the new gasket in place. Our technicians tighten bolts in a specific sequence and to a specified torque to ensure even pressure and a proper seal. Any components that were removed to access the oil pan are reinstalled.
7. Refilling Oil We add new engine oil to your vehicle and check the oil level to ensure it is correct.
8. Testing Our technicians start your vehicle and check for leaks around the oil pan gasket area. A test drive is performed to ensure there are no leaks and that your vehicle is operating correctly.
9. Final Checks After the test drive, we inspect your vehicle again for any signs of oil leakage. The oil level is checked once more and topped off if necessary. This process can vary slightly depending on the make and model of your vehicle, as well as the specific design of the engine and oil pan.

What is a Oil Pan Gasket and What Does It Do?
The oil pan gasket is a crucial component in a vehicle's engine system. It is a seal that fits between the oil pan and the engine block. The oil pan itself is a metal container located at the bottom of the engine, designed to hold the engine oil that lubricates the engine's moving parts. The primary function of the oil pan gasket is to prevent oil from leaking out of the oil pan.
It ensures a tight seal between the oil pan and the engine block, which is essential for maintaining the proper oil level and pressure within the engine. A well-functioning oil pan gasket helps to keep the engine oil contained, preventing leaks that could lead to oil loss, reduced lubrication, and potential engine damage.
Over time, the oil pan gasket can wear out or become damaged due to factors like heat, pressure, and exposure to engine fluids. When this happens, it may lead to oil leaks, which can be identified by oil spots under the vehicle or a drop in oil levels. Replacing a faulty oil pan gasket is important to maintain the engine's health and performance.
Signs of a bad Oil Pan Gasket
The oil pan gasket is a crucial component in your vehicle's engine, providing a seal between the oil pan and the engine block to prevent oil leaks. When the oil pan gasket begins to fail, there are several signs you might notice:
1. Oil Leaks: The most obvious sign of a failing oil pan gasket is oil leaking from the engine. You might notice oil spots or puddles under your vehicle, especially after it has been parked for a while.
2. Low Oil Levels: If the gasket is leaking, you may find that your engine oil levels are consistently low, even after topping up. This can lead to more serious engine problems if not addressed.
3. Engine Overheating: Oil helps to cool the engine by reducing friction. If there is an oil leak, the engine might not be properly lubricated, leading to overheating.
4. Burning Oil Smell: If oil is leaking onto hot engine components, it can produce a burning oil smell. This is often noticeable when the engine is running or immediately after turning it off.
5. Smoke from the Engine: Oil leaking onto the exhaust manifold or other hot parts of the engine can cause smoke to emanate from the engine bay.
6. Check Engine Light: In some cases, a significant oil leak can trigger the check engine light. This is often due to the engine running low on oil, which can affect its performance.
7. Engine Performance Issues: A lack of proper lubrication due to low oil levels can lead to engine performance issues, such as reduced power, rough idling, or stalling.If you notice any of these signs, it's important to have your vehicle inspected by a professional mechanic as soon as possible. Ignoring a failing oil pan gasket can lead to more severe engine damage and costly repairs.
How It Works
- Get a quote online or set-up a time to have your vehicle looked at.
- Pick time slots that work for you, easily, online.
- We will confirm appointments and send reminders.
- Our mechanics bring everything that is needed to you.
- All you have to do is provided a safe area for the work to be performed.
What we need from you
- A safe place to work on your vehicle
- No working on the side of busy roads
- No working on unstable or steep surfaces.
- We do not perform repairs during severe weather.
- Authorization from a property owner or management.
- Repair work done in a parking lot or at your requires permission.
- We do not do repairs in areas restricted by law.
Common Questions
Service Area
Our primary service area is greater Grand Rapids and includes Comstock Park, East Grand Rapids, Grandville, Kentwood, Walker, and Wyoming
Our secondary service area is provided by our Belding location and includes: Belding, Greenville, Ionia and the sorrounding areas.
Contact us if you have any questions about where we provide services.