Service and Cost
Stay Rod Repair Service Costs
Simple Stay Rod Repair
Typically involves straightening or minor repairs to the stay rod without removal. Labor time: 1-2 hours
Estimated Cost:$125-$250
Stay Rod Replacement
Complete removal and replacement of damaged stay rod. Labor time: 2-3 hours
Estimated Cost:$250-$375
Complex Stay Rod System Repair
Repairs involving multiple stay rods or related components. Labor time: 3-4 hours
Estimated Cost:$375-$500
Emergency Stay Rod Repair
Urgent repairs requiring immediate attention. Labor time: 2-3 hours plus emergency fee
Estimated Cost:$375-$500
Note: These are estimated costs based on our standard rate of $125/hour. Actual costs may vary depending on the specific requirements of your repair and any necessary parts. Additional charges may apply for parts and materials.
Additional Services:
- Stay rod inspection and assessment: $125
- Preventive maintenance: $125-$250
- Stay rod system upgrade consultation: $125
Stay Rod Repair Procedures by Type
Single Stay Rod
Common Issues:Bent rod, damaged threads, worn bushings, seized joints
Repair Steps:
- Remove stay rod assembly from vehicle
- Inspect rod for straightness and thread condition
- Check bushings for wear and deterioration
- Replace damaged components as needed:
- Install new bushings if worn
- Replace bent rod with new one
- Clean and lubricate threads
- Reinstall and adjust to proper specifications
- Test for proper movement and stability
Double Stay Rod
Common Issues:Misalignment, worn center joint, damaged threads on either rod
Repair Steps:
- Remove complete assembly from vehicle
- Disassemble center joint
- Inspect both rods and center mechanism for wear
- Replace components as necessary:
- Install new center joint if worn
- Replace any bent or damaged rods
- Replace worn bushings at mounting points
- Reassemble with proper lubrication
- Adjust to correct length and alignment
- Test for smooth operation
Adjustable Stay Rod
Common Issues:Seized adjustment mechanism, thread wear, misalignment
Repair Steps:
- Remove assembly from mounting points
- Clean and inspect adjustment mechanism
- Check for thread damage and wear
- Service or replace components:
- Clean and lubricate adjustment threads
- Replace lock nuts if damaged
- Install new rod if threads are stripped
- Verify smooth adjustment operation
- Set to proper length and secure lock nuts
- Reinstall and test functionality
Important Safety Note:Always follow manufacturer specifications for torque settings and adjustment procedures. Improper installation or adjustment can affect vehicle stability and safety.
Note: These are general repair procedures. Specific vehicles may require additional or modified steps. Always consult your vehicle's service manual for detailed instructions.
Understanding Stay Rods and Their Functions
No content available for this section.
Signs and Symptoms of Stay Rod Failure
Stay Rod Maintenance and Failure Signs
Threaded Stay Rods
Signs of Failure:
- Visible thread wear or damage
- Corrosion or rust, especially in thread areas
- Bent or misaligned rods
- Loose nuts or difficulty maintaining proper tension
Service Schedule:
- Visual inspection every 6 months
- Thread cleaning and lubrication annually
- Replacement recommended every 5-7 years depending on usage
Welded Stay Rods
Signs of Failure:
- Cracks in or around weld areas
- Surface pitting or corrosion
- Deformation or bending
- Visible stress marks near connection points
Service Schedule:
- Visual inspection every 3 months
- Weld integrity check annually
- Full inspection by certified welder every 2 years
Adjustable Stay Rods
Signs of Failure:
- Excessive play in adjustment mechanism
- Seized or difficult adjustment points
- Wear in pin holes or connection points
- Loss of proper tension
Service Schedule:
- Adjustment mechanism check every 3 months
- Lubrication of moving parts every 6 months
- Complete overhaul every 3-4 years
Spring-Loaded Stay Rods
Signs of Failure:
- Reduced spring tension
- Visible spring damage or deformation
- Unusual noise during operation
- Inconsistent tension maintenance
Service Schedule:
- Spring tension check monthly
- Mechanism cleaning and lubrication every 6 months
- Spring replacement every 2-3 years
Note: All service intervals are general guidelines. Actual maintenance requirements may vary based on operating conditions, environment, and usage intensity.
How It Works
- Get a quote online or set-up a time to have your vehicle looked at.
- Pick time slots that work for you, easily, online.
- We will confirm appointments and send reminders.
- Our mechanics bring everything that is needed to you.
- All you have to do is provided a safe area for the work to be performed.
What we need from you
- A safe place to work on your vehicle
- No working on the side of busy roads
- No working on unstable or steep surfaces.
- We do not perform repairs during severe weather.
- Authorization from a property owner or management.
- Repair work done in a parking lot or at your requires permission.
- We do not do repairs in areas restricted by law.
Common Questions
Service Area
Our primary service area is greater Grand Rapids and includes Comstock Park, East Grand Rapids, Grandville, Kentwood, Walker, and Wyoming
Our secondary service area is provided by our Belding location and includes: Belding, Greenville, Ionia and the sorrounding areas.
Contact us if you have any questions about where we provide services.
