Wheel Stud Repair Service Costs
Basic Wheel Stud Replacement
For a single wheel stud replacement on an easily accessible hub, expect to pay between $125-$187.50 (1-1.5 hours labor) plus the cost of parts ($5-15 per stud). This is the most common scenario where no complications are present.
Multiple Stud Replacement - Same Wheel
When replacing multiple studs on the same wheel hub, labor costs typically range from $187.50-$250 (1.5-2 hours labor) plus parts ($5-15 per stud). The initial setup time is shared across multiple repairs, making it more cost-effective per stud.
Damaged Hub Repair
If the wheel hub is damaged and requires repair or replacement along with the stud(s), costs can range from $312.50-$500 (2.5-4 hours labor) plus parts ($100-300 for hub assembly). This is necessary when the stud hole is stripped or enlarged.
Emergency/Roadside Stud Replacement
For mobile service or emergency repairs, additional service fees apply. Expect base labor costs of $250 (2 hours minimum) plus parts and emergency service surcharge.
Note: All prices are estimates based on our standard rate of $125/hour. Actual costs may vary depending on vehicle make/model and specific damage conditions. Parts prices are approximate and subject to market variations.
Additional Considerations:
- Luxury and exotic vehicles may require specialized parts and additional labor time
- Rust or corrosion can increase labor time and costs
- Some vehicles require wheel hub removal for stud replacement
- All repairs include proper torque specification and safety inspection
Replacement Procedures
When replacing or repairing a wheel stud, several steps and components are typically involved to ensure your vehicle's wheel is securely attached and functions properly. Here's what our service includes:1. Diagnosis:Our technicians perform a thorough inspection to confirm the wheel stud's condition. We check for visible damage, such as bending, stripping, or corrosion, and verify whether the wheel nuts can be properly tightened.
2. Removal of the Wheel:We safely lift your vehicle and remove the wheel to access the wheel hub and the damaged stud, carefully loosening and removing the lug nuts.
3. Removing the Damaged Stud:Our technicians remove the damaged wheel stud using specialized tools. If necessary, we'll remove brake components to gain better access to the stud.
4. Installing the New Stud:We install a new wheel stud into the hub using professional-grade equipment to ensure it's properly seated.
5. Reassembly:After securing the new stud, we reinstall any removed components and replace the wheel onto the hub. The lug nuts are tightened in a crisscross pattern for even pressure distribution.
6. Torque Specifications:We use a calibrated torque wrench to tighten the lug nuts to your vehicle manufacturer's exact specifications, ensuring proper wheel attachment and stud protection.
7. Final Inspection:Our technicians perform a comprehensive check to verify proper installation and security. This includes wheel alignment verification and checking for any unusual conditions.
8. Test Drive:We complete the service with a test drive to confirm the repair's success and ensure your vehicle's wheel assembly functions perfectly.
What is a Wheel Stud and what does it do
No content available for this section.
How do I know I need to replace my Wheel Stud
Wheel Stud Maintenance and Warning Signs
Signs of Wheel Stud Failure:
- Visible rust or corrosion on the stud threads
- Stripped or damaged threads
- Loose or wobbling wheels
- Clicking or knocking sounds while driving
- Visible cracks or breaks in the stud
- Difficulty in removing or installing lug nuts
- Bent or misaligned studs
Typical Service Schedule:
- Inspect wheel studs during every tire rotation (typically every 5,000-7,500 miles)
- Check torque specifications on lug nuts every 50,000 miles
- Replace wheel studs if:
- Any damage is visible
- After 100,000 miles as preventative maintenance
- When installing new wheels that require different stud specifications
Important Note: Wheel studs are critical safety components. If you notice any of the above warning signs, have your vehicle inspected immediately by a qualified technician. Never drive with damaged or compromised wheel studs as this could lead to wheel separation and serious accidents.
Regular inspection and maintenance of wheel studs is essential for your safety and the proper function of your vehicle's wheels.
How It Works
- Get a quote online or set-up a time to have your vehicle looked at.
- Pick time slots that work for you, easily, online.
- We will confirm appointments and send reminders.
- Our mechanics bring everything that is needed to you.
- All you have to do is provided a safe area for the work to be performed.
What we need from you
- A safe place to work on your vehicle
- No working on the side of busy roads
- No working on unstable or steep surfaces.
- We do not perform repairs during severe weather.
- Authorization from a property owner or management.
- Repair work done in a parking lot or at your requires permission.
- We do not do repairs in areas restricted by law.
Common Questions
Service Area
Our primary service area is greater Grand Rapids and includes Comstock Park, East Grand Rapids, Grandville, Kentwood, Walker, and Wyoming
Our secondary service area is provided by our Belding location and includes: Belding, Greenville, Ionia and the sorrounding areas.
Contact us if you have any questions about where we provide services.
