TPMS Reset and Relearn Service Costs
Basic TPMS Reset
For vehicles requiring a simple TPMS reset through the vehicle's onboard computer system or dashboard menu.
Typical time: 10-15 minutes
Cost: $31.25 - $46.88
Stationary Relearn
For vehicles requiring a relearn procedure while the vehicle is parked, using a TPMS tool to activate each sensor.
Typical time: 15-20 minutes
Cost: $46.88 - $62.50
Auto Relearn
For vehicles requiring a driving procedure to complete the relearn process.
Typical time: 20-30 minutes
Cost: $62.50 - $93.75
OBD-II Relearn
For vehicles requiring sensor registration through the OBD-II port using specialized equipment.
Typical time: 20-25 minutes
Cost: $62.50 - $78.13
Note: These prices are estimates based on our standard labor rate of $125/hour. Additional costs may apply if sensor replacement or programming is required. Some vehicles may require specific procedures that could affect the final price.
Additional Services:
• TPMS Sensor Programming: Additional $25-$35 per sensor
• Sensor Replacement: Cost varies by vehicle make and model
• Battery Replacement: $15-$25 per sensor
TPMS Reset/Relearn Procedures by Type
Auto-Learn Systems
Common in many Asian vehicles (Toyota, Honda, Nissan)
1. Inflate all tires to the recommended pressure
2. Drive the vehicle at speeds above 25 mph for about 20-30 minutes
3. System will automatically detect and register new sensor positions
Note: Some vehicles may require initial reset using dashboard buttons
Stationary Relearn
Common in GM vehicles
1. Set parking brake and turn ignition to 'ON' position
2. Press and hold brake pedal
3. Rapidly press and release accelerator pedal three times
4. Horn will chirp, indicating system is in learn mode
5. Starting with left front tire, use TPMS tool to activate sensor
6. Wait for horn chirp before moving to next tire
7. Repeat for all four tires in sequence: LF RF RR LR
OBD-II Relearn
Common in Ford, Chrysler, and some European vehicles
1. Connect TPMS scan tool to OBD-II port
2. Select vehicle make, model, and year
3. Follow tool prompts to initiate relearn procedure
4. Tool will communicate with vehicle's ECU to register new sensor IDs
5. Verify successful registration on dashboard display
Manual Activation
Common in European vehicles (BMW, Mercedes)
1. Access vehicle's TPMS reset menu through dashboard interface
2. Select "Reset TPMS" or "Calibrate TPMS"
3. Confirm all tires are properly inflated
4. Press confirmation button to initiate reset
5. Drive vehicle to complete calibration process
Tool-Assisted Relearn
Used across multiple manufacturers
1. Place TPMS tool near valve stem of each tire
2. Activate each sensor in specified sequence
3. Verify successful activation through tool display
4. Use tool to transfer data to vehicle's ECU
5. Confirm system reset on dashboard display
Important Notes:
- Specific procedures may vary by vehicle make, model, and year
- Professional-grade TPMS tools may be required for some vehicles
- Always ensure proper tire pressure before beginning any relearn procedure
- Some procedures may require specific driving conditions or speeds
Types of TPMS Reset/Relearn Procedures
Auto Relearn
Auto relearn is the simplest form of TPMS reset procedure. After installing new sensors or rotating tires, you simply drive the vehicle at speeds above 20 mph for about 20 minutes. During this time, the vehicle's TPMS system will automatically detect and learn the new sensor positions.No special tools or procedures are required, making this the most user-friendly option.
Stationary Relearn
Stationary relearn requires a specific sequence of actions (usually involving the key cycle and brake pedal) while the vehicle remains parked. This procedure tells the vehicle's computer to enter a learning mode and register new sensor positions.While no special tools are needed, the exact sequence must be followed precisely and varies by vehicle make and model.
OBD Relearn
OBD (On-Board Diagnostics) relearn requires connecting a specialized TPMS tool to the vehicle's OBD-II port. The tool communicates directly with the vehicle's computer system to program new sensor IDs and positions. This method isquick and reliable but requires professional-grade equipment. It's commonly used in professional tire shops and dealerships.
TPMS Tool Relearn
This procedure requires a TPMS activation tool to wake up each sensor individually in a specific order. The vehicle must be in learn mode during this process.This method combines both tool activation and vehicle procedures, making it more complex but very accurate. It's typically used when other methods aren't available or successful.
Manual Sensor ID Input
Some vehicles require manually entering the sensor ID numbers into the vehicle's computer system using a scan tool or the vehicle's infotainment system. This method ismost common in European vehiclesand requires knowing the specific ID numbers of each new sensor being programmed.
Note:The specific relearn procedure required for your vehicle depends on its make, model, and year. Using the wrong procedure may result in the TPMS system not functioning correctly.
Common TPMS Reset/Relearn Failure Symptoms and Warning Signs
TPMS Reset and Relearn Procedures - Signs of Failure & Service Schedules
Auto Relearn
Signs of Failure:
- TPMS light remains on after driving for 20+ minutes
- Inconsistent pressure readings
- System fails to recognize new sensor installations
Service Schedule: Only needed when replacing sensors or after significant tire service. No regular maintenance required.
Stationary Relearn
Signs of Failure:
- TPMS light continues flashing after completion
- Vehicle doesn't respond to key cycle sequence
- Horn doesn't sound during procedure
Service Schedule: Perform after tire rotation, sensor replacement, or when TPMS light indicates issues. Typically needed 1-2 times per year with regular tire maintenance.
OBD Relearn
Signs of Failure:
- Error messages during relearn process
- Tool unable to communicate with vehicle
- Incomplete sensor registration
Service Schedule: Required after sensor replacement or programming. Should be performed whenever new sensors are installed or vehicle receives major tire service.
TPMS Tool Relearn
Signs of Failure:
- Tool shows "Failed to Activate Sensor" message
- Incomplete sensor data transmission
- Battery issues with tool
Service Schedule: Needed when installing new sensors, after tire replacement, or during routine tire maintenance. Tool should be updated regularly per manufacturer guidelines.
Manual Activation
Signs of Failure:
- Sensors unresponsive to magnet activation
- Inconsistent or no readings
- System fails to recognize manual trigger
Service Schedule: Perform as needed when replacing sensors or during tire service. No regular schedule required, but system should be tested during routine maintenance.
Note: Always consult your vehicle's manual for specific TPMS procedures and maintenance schedules, as requirements can vary by make and model.
How It Works
- Get a quote online or set-up a time to have your vehicle looked at.
- Pick time slots that work for you, easily, online.
- We will confirm appointments and send reminders.
- Our mechanics bring everything that is needed to you.
- All you have to do is provided a safe area for the work to be performed.
What we need from you
- A safe place to work on your vehicle
- No working on the side of busy roads
- No working on unstable or steep surfaces.
- We do not perform repairs during severe weather.
- Authorization from a property owner or management.
- Repair work done in a parking lot or at your requires permission.
- We do not do repairs in areas restricted by law.
Common Questions
Service Area
Our primary service area is greater Grand Rapids and includes Comstock Park, East Grand Rapids, Grandville, Kentwood, Walker, and Wyoming
Our secondary service area is provided by our Belding location and includes: Belding, Greenville, Ionia and the sorrounding areas.
Contact us if you have any questions about where we provide services.
