Telematics & GPS Installation Cost Guide
Basic GPS Tracker Installation
Typical Duration: 1-1.5 hours
Estimated Cost: $125-$187.50
Includes basic hardwired GPS tracker installation with standard mounting and basic wiring to vehicle power source.
Fleet Telematics System Installation
Typical Duration: 2-3 hours
Estimated Cost: $250-$375
Includes advanced telematics device installation with connection to vehicle diagnostic port, additional sensors, and comprehensive testing.
ELD (Electronic Logging Device) Installation
Typical Duration: 1.5-2 hours
Estimated Cost: $187.50-$250
Includes ELD device mounting, connection to vehicle diagnostic port, and initial system configuration.
Asset Tracking Device Installation
Typical Duration: 1-2 hours
Estimated Cost: $125-$250
Includes weatherproof tracker installation on trailers, equipment, or other assets with custom mounting solutions.
Complex Vehicle Monitoring System
Typical Duration: 3-4 hours
Estimated Cost: $375-$500
Includes installation of multiple sensors, camera systems, advanced telematics devices, and complete system integration.
Note: Prices are based on our standard rate of $125/hour. Additional costs may apply for specialized equipment, custom mounting solutions, or complex vehicle requirements. Please contact us for a detailed quote specific to your needs.
Standard GPS/Telematics Installation Procedure
1. Initial Vehicle Assessment
- Verify vehicle information (make, model, year)
- Document vehicle condition with photos
- Identify optimal device mounting location
- Test vehicle's electrical system
2. Device Preparation
- Verify device functionality before installation
- Configure device settings according to customer requirements
- Test cellular and GPS connectivity
3. Installation Process
- Locate OBD-II port or suitable power source
- Route wiring harness discreetly through vehicle
- Secure device in hidden location (typically under dashboard)
- Connect power and ground wires
- Verify all connections are properly insulated
4. System Testing
- Power up device and confirm LED indicators
- Verify GPS signal acquisition
- Test cellular communication
- Confirm data transmission to tracking platform
5. Quality Control
- Perform road test to verify tracking accuracy
- Check all vehicle systems are functioning normally
- Clean installation area
- Document installation with photos
6. Customer Handover
- Demonstrate system functionality to customer
- Provide basic training on platform usage
- Supply relevant documentation
- Explain warranty and support procedures
Note: Installation time typically takes 30-60 minutes depending on vehicle type and installation complexity. All work is performed by certified technicians following manufacturer guidelines.
Hardwired GPS Installation (Additional Steps)
1. Additional Preparation
- Identify constant power source
- Locate suitable ground point
- Plan wire routing path
2. Special Installation Steps
- Remove necessary panels for wire access
- Install inline fuse for circuit protection
- Solder or crimp all connections
- Apply heat shrink tubing for weather protection
3. Additional Testing
- Verify constant power supply
- Test ignition detection
- Confirm all removed panels are properly secured
Note: Hardwired installations typically take 1-2 hours and provide a more permanent, tamper-resistant solution.
Asset Tracking Installation
1. Unique Requirements
- Weather-resistant mounting considerations
- Battery life optimization
- Signal strength testing in various locations
2. Installation Steps
- Mount device in protected location
- Secure with industrial-grade fasteners
- Apply weatherproofing measures
- Configure power-saving settings
Note: Asset tracking installations focus on durability and longevity, with special attention to environmental protection.
All installations include:
- 90-day installation warranty
- Professional grade materials
- Certified technician installation
- Post-installation support
Understanding Telematics/GPS Installation
No content available for this section.
Common Failure Symptoms in Telematics/GPS Installation: Troubleshooting Guide
Common Signs of GPS/Telematics Installation Issues & Maintenance Guide
Hardwired GPS Installations
Signs of Failure:
- Device not reporting location data
- Intermittent connectivity issues
- Incorrect vehicle data readings
- Battery drain issues
- LED indicators showing error status
Maintenance Schedule:
- Annual inspection of wiring connections
- Check for loose mounting every 6 months
- Verify power supply connections yearly
- Test backup battery every 2 years (if equipped)
OBD-II Port Installations
Signs of Failure:
- Device frequently disconnecting
- Check Engine light appearing unexpectedly
- Poor connection to OBD-II port
- Device feeling loose when touched
- No data transmission to platform
Maintenance Schedule:
- Monthly physical inspection of device connection
- Clean OBD-II port every 3 months
- Check for firmware updates quarterly
- Verify proper seating in port every time vehicle serviced
Battery-Powered Asset Trackers
Signs of Failure:
- Decreased reporting frequency
- Missing location updates
- Low battery warnings
- Physical damage to housing
- Water ingress indicators activated
Maintenance Schedule:
- Battery replacement every 3-5 years (depending on model)
- Quarterly inspection of weatherproof seals
- Check mounting security monthly
- Clean solar panels (if equipped) every 3 months
Important Note: These are general guidelines. Specific maintenance schedules may vary based on device manufacturer, usage conditions, and environmental factors. Always consult your device's manual or contact your service provider for detailed maintenance instructions.
How It Works
- Get a quote online or set-up a time to have your vehicle looked at.
- Pick time slots that work for you, easily, online.
- We will confirm appointments and send reminders.
- Our mechanics bring everything that is needed to you.
- All you have to do is provided a safe area for the work to be performed.
What we need from you
- A safe place to work on your vehicle
- No working on the side of busy roads
- No working on unstable or steep surfaces.
- We do not perform repairs during severe weather.
- Authorization from a property owner or management.
- Repair work done in a parking lot or at your requires permission.
- We do not do repairs in areas restricted by law.
Common Questions
Service Area
Our primary service area is greater Grand Rapids and includes Comstock Park, East Grand Rapids, Grandville, Kentwood, Walker, and Wyoming
Our secondary service area is provided by our Belding location and includes: Belding, Greenville, Ionia and the sorrounding areas.
Contact us if you have any questions about where we provide services.
