Tail Light Lens Repair Cost Guide
Below are typical repair costs for various tail light lens services. Labor rate is calculated at $125/hour.
Basic Lens Cleaning and Restoration• Service time: 30-45 minutes
• Labor cost: $62-94
• Materials: $15-25
• Total estimated cost: $77-119
• Service time: 1-1.5 hours
• Labor cost: $125-188
• Materials: $30-45
• Total estimated cost: $155-233
• Service time: 1-2 hours
• Labor cost: $125-250
• Parts: $75-300 (varies by vehicle)
• Total estimated cost: $200-550
Note: Prices may vary based on vehicle make/model and extent of damage. All estimates include basic materials and labor. Additional costs may apply for luxury vehicles or complex repairs.
Additional Services:
- Water damage assessment: $50
- Seal replacement: $85-125
- Wiring repair: $150-275
*These are estimated prices. Please contact us for an accurate quote specific to your vehicle.
Tail Light Lens Repair Procedures
Cracked or Broken Lens
Repair Steps:
- Clean the damaged area thoroughly with alcohol to remove dirt and debris
- Sand the edges of the crack to create a smooth surface
- Apply tail light repair tape over the crack, ensuring no air bubbles
- For larger cracks, use a clear epoxy designed for automotive lights
- Allow repair to cure completely (typically 24 hours)
- Test light functionality
Note: If crack is severe, full replacement may be necessary for safety and legal compliance.
Yellowed/Oxidized Lens
Repair Steps:
- Clean lens thoroughly with soap and water
- Apply masking tape around the lens to protect surrounding paint
- Wet sand with 1000-grit sandpaper
- Progress to 2000-grit sandpaper
- Apply polishing compound with buffer or by hand
- Apply UV-resistant clear coat
- Allow to dry completely
Water-Damaged Lens
Repair Steps:
- Remove tail light assembly
- Drain any accumulated water
- Dry thoroughly with compressed air
- Check and replace damaged seals
- Apply silicone sealant around edges
- Reinstall assembly
- Test for proper sealing
Scratched Lens
Repair Steps:
- Clean lens surface thoroughly
- For light scratches:
- Apply polishing compound
- Buff with microfiber cloth
- For deeper scratches:
- Wet sand with 2000-grit sandpaper
- Apply polishing compound
- Buff to restore clarity
- Apply UV-resistant clear coat
Important Safety Notice:All repairs must comply with local vehicle regulations. If repair doesn't restore full functionality or clarity, replacement is recommended.
Professional service is recommended for complex repairs or when unsure about DIY capabilities.
Understanding Tail Light Lenses
No content available for this section.
Common Failure Symptoms of Tail Light Lenses
Understanding Tail Light Lens Maintenance and Failure Signs
LED Tail Light Lens
- Typical lifespan: 10-20 years
- No regular service schedule required
- Signs of failure:
- Moisture accumulation inside lens
- Cracking or yellowing of the plastic cover
- Partial lighting (some LEDs not functioning)
- Dimming of overall brightness
Traditional Incandescent Tail Light Lens
- Service schedule: Bulb replacement every 2-3 years
- Signs of failure:
- Burned-out bulbs
- Discoloration of lens cover
- Condensation buildup
- Cracks or chips in the lens
- Fading of red coloring
Custom/Aftermarket Tail Light Lens
- Service schedule varies by manufacturer
- Signs of failure:
- Poor seal leading to water infiltration
- UV damage causing cloudiness
- Separation of lens from housing
- Color fading or peeling
- Electrical connection issues
Note: Regular inspection of all tail light lenses should be performed during routine vehicle maintenance. Any signs of damage or deterioration should be addressed promptly to maintain safety and legal compliance.
How It Works
- Get a quote online or set-up a time to have your vehicle looked at.
- Pick time slots that work for you, easily, online.
- We will confirm appointments and send reminders.
- Our mechanics bring everything that is needed to you.
- All you have to do is provided a safe area for the work to be performed.
What we need from you
- A safe place to work on your vehicle
- No working on the side of busy roads
- No working on unstable or steep surfaces.
- We do not perform repairs during severe weather.
- Authorization from a property owner or management.
- Repair work done in a parking lot or at your requires permission.
- We do not do repairs in areas restricted by law.
Common Questions
Service Area
Our primary service area is greater Grand Rapids and includes Comstock Park, East Grand Rapids, Grandville, Kentwood, Walker, and Wyoming
Our secondary service area is provided by our Belding location and includes: Belding, Greenville, Ionia and the sorrounding areas.
Contact us if you have any questions about where we provide services.
