50 Point Inspection Service - Estimated Repair Costs
Engine & Mechanical Systems
Engine Oil & Filter Condition:$125-250 (1-2 hours labor plus parts)
Engine Mounts:$375-625 (3-5 hours labor plus parts)
Belt Condition:$125-250 (1-2 hours labor plus parts)
Coolant Level & Condition:$125-375 (1-3 hours labor plus parts)
Radiator & Hoses:$250-500 (2-4 hours labor plus parts)
Transmission & Drivetrain
Transmission Fluid:$125-250 (1-2 hours labor plus parts)
CV Joints & Boots:$375-625 (3-5 hours labor plus parts)
Differential Fluid:$125-250 (1-2 hours labor plus parts)
Brake System
Brake Pad Condition:$250-375 (2-3 hours labor plus parts)
Brake Rotors:$250-375 (2-3 hours labor plus parts)
Brake Fluid:$125-250 (1-2 hours labor plus parts)
Brake Lines & Hoses:$250-500 (2-4 hours labor plus parts)
Steering & Suspension
Power Steering System:$250-500 (2-4 hours labor plus parts)
Shock Absorbers/Struts:$500-750 (4-6 hours labor plus parts)
Ball Joints:$375-625 (3-5 hours labor plus parts)
Tie Rod Ends:$250-375 (2-3 hours labor plus parts)
Electrical System
Battery Condition:$125 (1 hour labor plus parts)
Alternator:$250-375 (2-3 hours labor plus parts)
Starter:$250-375 (2-3 hours labor plus parts)
Lighting System:$125-250 (1-2 hours labor plus parts)
Additional Components
Air Filter:$125 (1 hour labor plus parts)
Cabin Filter:$125 (1 hour labor plus parts)
Windshield Wipers:$125 (1 hour labor plus parts)
HVAC System:$250-625 (2-5 hours labor plus parts)
Note: These are estimated costs based on our standard labor rate of $125/hour. Actual costs may vary depending on vehicle make, model, and condition. Parts costs are additional and vary by manufacturer and availability. Some repairs may require additional diagnostic time.
Engine Compartment
1. Engine Oil Level and Condition
Procedure:
- Park vehicle on level surface and wait for engine to cool
- Locate and remove dipstick
- Wipe clean with lint-free cloth
- Reinsert and remove to check level
- Inspect oil color and consistency
- Add appropriate oil if needed
2. Coolant Level and Condition
Procedure:
- Check coolant reservoir level when engine is cold
- Inspect color and consistency
- Test antifreeze concentration
- Top up with correct mixture if needed
- Check for signs of contamination
3. Power Steering Fluid
Procedure:
- Locate power steering reservoir
- Check fluid level with engine off
- Inspect fluid color and clarity
- Add appropriate fluid if needed
- Check for leaks around pump and hoses
4. Brake Fluid
Procedure:
- Locate brake fluid reservoir
- Check fluid level
- Inspect fluid color (should be clear to amber)
- Test moisture content
- Top up if necessary with specified fluid
Undercarriage
5. Brake System Components
Procedure:
- Remove wheels
- Measure brake pad thickness
- Inspect rotors for wear and scoring
- Check brake lines for leaks
- Test brake caliper movement
- Inspect brake hoses for cracks
Important Note:
All repairs should be performed by certified technicians using appropriate safety equipment and following manufacturer specifications.
How a 50 Point Inspection Can Prevent Major Car Problems
A 50 Point Inspection is a comprehensive evaluation process that thoroughly examines various components and systems to ensure optimal performance, safety, and reliability. Here's what you need to know about our different inspection services:
Home 50 Point Inspection
Our Home 50 Point Inspection isa detailed examination of your property's critical systems and components. This inspection covers:
- Structural elements
- Electrical systems
- Plumbing infrastructure
- HVAC systems
- Roof condition
- Foundation integrity
- Interior and exterior components
Vehicle 50 Point Inspection
The Vehicle 50 Point Inspection isa comprehensive assessment of your vehicle's mechanical and safety systems. This service includes:
- Engine performance
- Transmission operation
- Brake system evaluation
- Suspension components
- Fluid levels and condition
- Electrical systems check
- Safety features verification
HVAC 50 Point Inspection
Our HVAC 50 Point Inspection isa thorough evaluation of your heating, ventilation, and air conditioning systems. The inspection covers:
- Heating and cooling efficiency
- Thermostat functionality
- Ductwork condition
- Air filter status
- Electrical connections
- Safety controls
- System performance metrics
Each inspection includes a detailed report of findings and recommendations for maintenance or repairs. Our certified inspectors use the latest tools and techniques to ensure accurate assessments and provide you with peace of mind.
Schedule your 50 Point Inspection today to protect your investment and ensure optimal performance!
Do not use shortcode
Do not use shortcode
How It Works
- Get a quote online or set-up a time to have your vehicle looked at.
- Pick time slots that work for you, easily, online.
- We will confirm appointments and send reminders.
- Our mechanics bring everything that is needed to you.
- All you have to do is provided a safe area for the work to be performed.
What we need from you
- A safe place to work on your vehicle
- No working on the side of busy roads
- No working on unstable or steep surfaces.
- We do not perform repairs during severe weather.
- Authorization from a property owner or management.
- Repair work done in a parking lot or at your requires permission.
- We do not do repairs in areas restricted by law.
Common Questions
Service Area
Our primary service area is greater Grand Rapids and includes Comstock Park, East Grand Rapids, Grandville, Kentwood, Walker, and Wyoming
Our secondary service area is provided by our Belding location and includes: Belding, Greenville, Ionia and the sorrounding areas.
Contact us if you have any questions about where we provide services.
